- Home/
- Specifications/
- Grader/
- Caterpillar/
- 163H
Construction Machinery. Grader Caterpillar 163H
Steerage
| Turn radius | 7.5 m |
| Left and right hinge connection | 20 degrees |
Sizes
| Height to cab upper part | 3131 mm |
| Dimensional length | 8713 mm |
| Between tyres width | 2553 mm |
| Wheelbase | 6169 mm |
| Blade base | 2518 mm |
| Dual axis wheelbase | 1523 mm |
| Rear ground clearance | 344 mm |
| Front part clearance | 625 mm |
Operation
| Front axle standard operating weight | 4589 kg |
| Rear axle standard operating weight | 11691 kg |
| Overall standard operating weight | 16280 kg |
| Front axle maximum operating weight | 8311 kg |
| Rear axle maximum operating weight | 14970 kg |
| Total maximum operating weight | 23281 kg |
| Fuel Capacity | 397 l. |
| Cooling system fluid volume | 38 l. |
| Hydraulic system fluid volume | 80 l. |
| Rear differential/final drive fluid volume | 47 l. |
| Circular gearbox fluid volume | 7 l. |
| Each tandem case fluid volume | 80 l. |
Motor
| Manufacturer | Caterpillar |
| Model | 3176C DITA ATAAC VHP |
| Effective speeds output 1-2 | 134 kW |
| Effective speeds output 3-4 | 149 kW |
| Effective speeds output 5-6 | 149 kW |
| Effective speeds output 7-8 | 164.1 kW |
| Maximum power | 164.1 kW |
| Displacement | 10.3 l. |
Hydraulic system
| Type of pump | axial piston |
| Pump flow rate | 206 l/min |
| Overflow valve pressure | 24150 kPa |
Gear box
| Transmission type | powershift transmission with direct drive |
| Forward gears number | 8 |
| Reverse gears number | 6 |
| Maximum forward speed | 43.6 km/h |
| Maximum reverse gear | 34.4 km/h |
Front Axle
| Wheel tilt | 18 degrees |
| General fluctuations | 32 degrees |
| Clearance | 625 mm |
Dump
| Mouldboard width | 4267 mm |
| Mouldboard height | 686 mm |
| Mouldboard thickness | 25 mm |
| Maximum cutting depth | 770 mm |
| Left lateral displacement | 851 mm |
| Lateral right shift | 943 mm |
| Blade pulling at maximum weight | 20953 kg |
| Lowered blade pressure | 14365 kg |
Circle
| Left shift | 848 mm |
| Right shift | 881 mm |
| Maximum radius outside left tyres | 2223 mm |
| Right maximum radius outside tyres | 2261 mm |
| Maximum lifting above ground level | 452 mm |
| Blade tilt front angle | 40 degrees |
| Blade tilt rear angle | 5 degrees |
| Diameter | 1530 mm |
Images
Sizes
| 1. Dimensional length | 8713 mm |
| 2. Between tyres width | 2553 mm |
| 3. Height to cab upper part | 3131 mm |
| 4. Wheelbase | 6169 mm |
| 5. Rear ground clearance | 344 mm |
| 6. Front part clearance | 625 mm |
| 7. Dual axis wheelbase | 1523 mm |
| 8. Blade base | 2518 mm |