Construction Machinery. Grader John Deere 770A

Steerage

Left and right hinge connection	25 degrees
Turn radius	6.7 m

Sizes

Height to cab upper part	3200 mm
Dimensional length	8470 mm
Between tyres width	2440 mm
Wheelbase	5970 mm
Blade base	2720 mm
Dual axis wheelbase	1540 mm
Front part clearance	572 mm

Operation

Front axle standard operating weight	3877.3 kg
Rear axle standard operating weight	9848.4 kg
Overall standard operating weight	13725.7 kg
Front axle maximum operating weight	4123.6 kg
Rear axle maximum operating weight	11230 kg
Total maximum operating weight	15353.6 kg
Fuel Capacity	265 l.
Oil system fluid volume	18.9 l.
Cooling system fluid volume	26.5 l.
Hydraulic system fluid volume	117 l.
Circular gearbox fluid volume	3.8 l.
Each tandem case fluid volume	18.9 l.
Tyre size	14.00-25
Operating voltage	24 V
Generator current strength	42 amperes

Motor

Manufacturer	John Deere
Model	6-466A
Power measured at	2200 rev / min
Torque measured at	1300 rev / min
Effective speeds output 7-8	111.9 kW
Cylinders number	6
Maximum power	111.9 kW
Effective drives torque 7-8	630.5 Nm
Displacement	7.6 l.
Aspiration	Turbocharging with intercooler

Hydraulic system

Type of pump	Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume
Pump flow rate	136.3 l/min

Gear box

Forward gears number	8
Reverse gears number	4
Maximum forward speed	40.4 km/h
Maximum reverse gear	13.8 km/h
Transmission type	powershift

Front Axle

Wheel tilt	20 degrees
General fluctuations	30 degrees
Clearance	572 mm

Dump

Mouldboard width	3657.6 mm
Mouldboard height	609.6 mm
Mouldboard thickness	22.4 mm
Left lateral displacement	683 mm
Lateral right shift	683 mm

Circle

Diameter	1500 mm
Rotating	360 degrees
Left shift	851 mm
Right shift	813 mm
Maximum radius outside left tyres	2280 mm
Right maximum radius outside tyres	2250 mm
Maximum lifting above ground level	432 mm
Blade tilt front angle	44 degrees
Blade tilt rear angle	10 degrees

Images

Sizes

1. Dimensional length	8470 mm
2. Between tyres width	2440 mm
3. Height to cab upper part	3200 mm
4. Wheelbase	5970 mm
6. Front part clearance	572 mm
7. Dual axis wheelbase	1540 mm
8. Blade base	2720 mm