Construction Machinery. Grader John Deere JD670

Steerage

Left and right hinge connection	25 degrees
Turn radius	6.7 m

Sizes

Height to cab upper part	3200 mm
Dimensional length	8310 mm
Between tyres width	2340 mm
Wheelbase	5970 mm
Blade base	2540 mm
Dual axis wheelbase	1540 mm
Front part clearance	559 mm

Operation

Front axle standard operating weight	3471 kg
Rear axle standard operating weight	8245 kg
Overall standard operating weight	11716 kg
Front axle maximum operating weight	3615 kg
Rear axle maximum operating weight	9741 kg
Total maximum operating weight	13356 kg
Fuel Capacity	227 l.
Oil system fluid volume	18.9 l.
Cooling system fluid volume	26.5 l.
Hydraulic system fluid volume	106 l.
Circular gearbox fluid volume	2.8 l.
Each tandem case fluid volume	15.1 l.
Tyre size	13.00-24
Operating voltage	24 V

Motor

Effective speeds output 7-8	93.2 kW
Maximum power	93.2 kW
Effective drives torque 7-8	504.4 Nm
Displacement	6.8 l.
Aspiration	turbocharging
Manufacturer	John Deere
Power measured at	2300 rev / min
Torque measured at	1300 rev / min
Cylinders number	6

Hydraulic system

Type of pump	Variable displacement with locking in the middle position
Pump flow rate	132 l/min
Overflow valve pressure	15513.2 kPa

Gear box

Transmission type	powershift
Forward gears number	8
Reverse gears number	4
Maximum forward speed	38.4 km/h
Maximum reverse gear	12.3 km/h

Front Axle

Wheel tilt	20 degrees
General fluctuations	30 degrees
Clearance	559 mm

Dump

Mouldboard width	3.7 mm
Mouldboard height	610 mm
Mouldboard thickness	22 mm
Left lateral displacement	683 mm
Lateral right shift	683 mm

Circle

Blade tilt front angle	35 degrees
Diameter	1470 mm
Rotating	360 degrees
Maximum radius outside left tyres	2130 mm
Right maximum radius outside tyres	2130 mm
Maximum lifting above ground level	409 mm

Images

Sizes

6. Front part clearance	559 mm
7. Dual axis wheelbase	1540 mm
8. Blade base	2540 mm
1. Dimensional length	8310 mm
2. Between tyres width	2340 mm
3. Height to cab upper part	3200 mm
4. Wheelbase	5970 mm