- Home/
- Specifications/
- Grader/
- Terex/
- TG150
Construction Machinery. Grader Terex TG150
Steerage
Turn radius | 6.9 m |
Left and right hinge connection | 45 degrees |
Sizes
Wheelbase | 5676 mm |
Blade base | 2204 mm |
Dual axis wheelbase | 1555 mm |
Rear ground clearance | 474 mm |
Front part clearance | 546 mm |
Height to cab upper part | 3276 mm |
Dimensional length | 9402 mm |
Between tyres width | 2419 mm |
Operation
Front axle standard operating weight | 4300 kg |
Rear axle standard operating weight | 10200 kg |
Overall standard operating weight | 14500 kg |
Fuel Capacity | 310 l. |
Cooling system fluid volume | 45 l. |
Hydraulic system fluid volume | 150 l. |
Transmission fluid volume | 18 l. |
Rear differential/final drive fluid volume | 15 l. |
Circular gearbox fluid volume | 6 l. |
Each tandem case fluid volume | 40 l. |
Tyre size | 13.00 -24 TG SGG-2A Goodyear |
Operating voltage | 24 V |
Generator current strength | 55 amperes |
Motor
Manufacturer | Cummins |
Power measured at | 2200 rev / min |
Effective speeds output 5-6 | 121.5 kW |
Cylinders number | 6 |
Maximum power | 121.5 kW |
Displacement | 6 l. |
Aspiration | turbocharging |
Hydraulic system
Type of pump | axial piston pump |
Pump flow rate | 99 l/min |
Overflow valve pressure | 18402.1 kPa |
Gear box
Transmission type | powershift transmission with torque converter |
Forward gears number | 6 |
Reverse gears number | 3 |
Maximum forward speed | 40 km/h |
Maximum reverse gear | 25 km/h |
Front Axle
Wheel tilt | 17 degrees |
General fluctuations | 15 degrees |
Clearance | 546 mm |
Dump
Mouldboard width | 3660 mm |
Mouldboard height | 580 mm |
Mouldboard thickness | 20 mm |
Left lateral displacement | 1250 mm |
Lateral right shift | 1250 mm |
Blade pulling at maximum weight | 8161.9 kg |
Circle
Diameter | 1348 mm |
Maximum radius outside left tyres | 2500 mm |
Right maximum radius outside tyres | 3180 mm |
Maximum lifting above ground level | 480 mm |
Images
Sizes
5. Rear ground clearance | 474 mm |
6. Front part clearance | 546 mm |
7. Dual axis wheelbase | 1555 mm |
8. Blade base | 2204 mm |
1. Dimensional length | 9402 mm |
2. Between tyres width | 2419 mm |
3. Height to cab upper part | 3276 mm |
4. Wheelbase | 5676 mm |