- Home/
- Specifications/
- Grader/
- Terex/
- TG190TA-3
Construction Machinery. Grader Terex TG190TA-3
Sizes
Height to cab upper part | 3300 mm |
Dimensional length | 10266 mm |
Between tyres width | 2490 mm |
Wheelbase | 6136 mm |
Dual axis wheelbase | 510 mm |
Rear ground clearance | 474 mm |
Front part clearance | 474 mm |
Operation
Front axle standard operating weight | 5000 kg |
Rear axle standard operating weight | 13700 kg |
Overall standard operating weight | 18700 kg |
Fuel Capacity | 480 l. |
Cooling system fluid volume | 42 l. |
Hydraulic system fluid volume | 170 l. |
Transmission fluid volume | 34 l. |
Rear differential/final drive fluid volume | 15 l. |
Circular gearbox fluid volume | 6 l. |
Each tandem case fluid volume | 21 l. |
Tyre size | 14.00 -24TG |
Operating voltage | 24 V |
Generator current strength | 55 amperes |
Motor
Maximum power | 131.2 kW |
Displacement | 6 l. |
Aspiration | turbocharging, water cooling |
Manufacturer | Cummins |
Effective speeds output 5-6 | 131.2 kW |
Hydraulic system
Type of pump | axial piston pump |
Pump flow rate | 99 l/min |
Overflow valve pressure | 127.8 kPa |
Gear box
Transmission type | powershift transmission with torque converter |
Forward gears number | 6 |
Reverse gears number | 3 |
Maximum forward speed | 40 km/h |
Maximum reverse gear | 19.4 km/h |
Front Axle
Wheel tilt | 17 degrees |
General fluctuations | 15 degrees |
Clearance | 546 mm |
Dump
Mouldboard width | 3660 mm |
Mouldboard height | 630 mm |
Mouldboard thickness | 20 mm |
Blade pulling at maximum weight | 14181.1 kg |
Circle
Maximum lifting above ground level | 110 mm |
Diameter | 1510 mm |
Images
Sizes
3. Height to cab upper part | 3300 mm |
4. Wheelbase | 6136 mm |
5. Rear ground clearance | 474 mm |
6. Front part clearance | 474 mm |
7. Dual axis wheelbase | 510 mm |
1. Dimensional length | 10266 mm |
2. Between tyres width | 2490 mm |