- Home/
- Specifications/
- Grader/
- Volvo/
- G990
Construction Machinery. Grader Volvo G990
Steerage
Left and right hinge connection | 21 degrees |
Turn radius | 8150 m |
Sizes
Height to cab upper part | 3280 mm |
Dimensional length | 9730 mm |
Between tyres width | 2800 mm |
Wheelbase | 6681 mm |
Blade base | 2935 mm |
Operation
Front axle standard operating weight | 6200 kg |
Rear axle standard operating weight | 15900 kg |
Overall standard operating weight | 22100 kg |
Front axle maximum operating weight | 8390 kg |
Rear axle maximum operating weight | 19050 kg |
Total maximum operating weight | 27200 kg |
Fuel Capacity | 498 l. |
Oil system fluid volume | 39 l. |
Cooling system fluid volume | 47 l. |
Hydraulic system fluid volume | 91 l. |
Transmission fluid volume | 61 l. |
Each tandem case fluid volume | 105 l. |
Tyre size | 16:00 x 24, G-2 |
Operating voltage | 24 V |
Generator current strength | 80 amperes |
Motor
Cylinders number | 6 |
Effective speeds output 7-8 | 206.6 kW |
Maximum power | 206.6 kW |
Effective drives torque 7-8 | 1260 Nm |
Displacement | 9.4 l. |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) |
Manufacturer | Volvo |
Model | D9B |
Power measured at | 1700 rev / min |
Torque measured at | 1550 rev / min |
Hydraulic system
Pump flow rate | 208 l/min |
Overflow valve pressure | 20684.3 kPa |
Type of pump | axial piston pump |
Gear box
Transmission type | HTE 840, Sequential direct drive gearbox with shifting under load Volvo |
Forward gears number | 8 |
Reverse gears number | 4 |
Maximum forward speed | 44.9 km/h |
Maximum reverse gear | 31.6 km/h |
Front Axle
Wheel tilt | 18 degrees |
General fluctuations | 16 degrees |
Clearance | 615 mm |
Dump
Left lateral displacement | 673 mm |
Mouldboard width | 4267.2 mm |
Lateral right shift | 673 mm |
Mouldboard height | 787 mm |
Blade pulling at maximum weight | 17145 kg |
Mouldboard thickness | 25 mm |
Lowered blade pressure | 11058 kg |
Maximum cutting depth | 825 mm |
Circle
Diameter | 1626 mm |
Rotating | 360 degrees |
Left shift | 762 mm |
Right shift | 749 mm |
Maximum radius outside left tyres | 2260 mm |
Right maximum radius outside tyres | 2260 mm |
Blade tilt front angle | 46 degrees |
Blade tilt rear angle | 13 degrees |
Images
Sizes
8. Blade base | 2935 mm |
1. Dimensional length | 9730 mm |
2. Between tyres width | 2800 mm |
3. Height to cab upper part | 3280 mm |
4. Wheelbase | 6681 mm |