- Home/
- Specifications/
- Wheel-Mounted Loader/
- Case/
- 621E
Construction Machinery. Wheel-Mounted Loader Case 621E
Sizes
Between tyres width | 2523 mm |
Height to cab upper part | 3395 mm |
Clearance | 370 mm |
Wheelbase | 2900 mm |
Hinge axis maximum height | 3830 mm |
Radius at maximum lifting and unloading | 1013 mm |
Length with bucket on ground level | 7384 mm |
Shovel
Breakout power | 103.4 kN |
Unloading ground clearance at maximum lifting | 2801 mm |
Shovel width | 2602 mm |
Bucket capacity with top | 2.3 m3 |
Brimmed bucket capacity | 2 m3 |
Operation
Fuel Capacity | 246 l. |
Hydraulic system fluid volume | 147.6 l. |
Engine oil volume | 13.2 l. |
Cooling system fluid volume | 36 l. |
Transmission fluid volume | 18.9 l. |
Front axle / differential fluid volume | 22 l. |
Rear axle / differential fluid volume | 22 l. |
Static tipping weight | 10603 kg |
Turn radius | 5245 mm |
Operating voltage | 24 V |
Generator current strength | 65 amperes |
Rear axle oscillating | 24 degrees |
Tyre size | 20.5 R25 |
Working weight | 12431 kg |
Motor
Manufacturer | Case |
Model | Family IV, 667TA/EDB, III Level III certified |
Effective power | 109 kW |
Full power | 116 kW |
Power measured at | 1800 rev / min |
Displacement | 6.7 l. |
Torque measured at | 1300 rev / min |
Maximum torque | 689 Nm |
Cylinders number | 6 |
Torque increase | 33 % |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) |
Hydraulic system
Type of pump | in the middle position with locking with pressure / flow compensation |
Overflow valve pressure | 24822 kPa |
Pump bandwidth | 171 l/min |
Lifting time | 6.3 sec |
Unloading time | 1.3 sec |
Lowering time | 4.7 sec |
Gear box
Transmission type | 4 forward / 3 reverse gears proportional with electronic control module |
Forward gears number | 4 |
Reverse gears number | 3 |
Maximum forward speed | 38.6 km/h |
Maximum reverse gear | 25 km/h |
Images
Sizes
1. Length with bucket on ground level | 7384 mm |
2. Between tyres width | 2523 mm |
3. Height to cab upper part | 3395 mm |
4. Wheelbase | 2900 mm |
5. Clearance | 370 mm |
6. Hinge axis maximum height | 3830 mm |
8. Radius at maximum lifting and unloading | 1013 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2801 mm |