Forestry and Logging Equipment. Felling-and-Bunching Machine John Deere 759J
Sizes
| Caterpillar track length on ground level | 3560 mm |
| Overall width | 3048 mm |
| Height to cab upper part | 3930 mm |
| Clearance | 711 mm |
| Maximum radius | 8300 mm |
| Rear platform swing radius | 1930 mm |
Operation
| Cooling system fluid volume | 38.6 l. |
| Engine oil volume | 28 l. |
| Hydraulic system fluid volume | 136 l. |
| Operating voltage | 24 V |
| Generator current strength | 80 amperes |
| Maximum speed | 3.9 km/h |
| Specific ground pressure | 59.3 kPa |
| Operational weight without attachment | 27242.8 kg |
| Fuel Capacity | 583 l. |
Motor
| Manufacturer | John Deere |
| Model | 6081H |
| Full power | 179.7 kW |
| Torque measured at | 1400 rev / min |
| Effective torque | 1229.7 Nm |
| Cylinders number | 6 |
| Displacement | 8.1 l. |
| Aspiration | turbocharging |
Carrier
| Caterpillar track pitch | 203.2 mm |
| Shoe dimensions | 609.6 mm |
| Traction force | 26036.2 kg |
| Rolling bearings number on either side | 8 |
| Track width | 2430 mm |
Booms
| Maximum cutting radius | 8300 mm |
| Minimum cutting radius | 3530 mm |
| Pin lifting at maximum radius | 4720 kg |
Alignment device
| Front end | 27 degrees |
| Rear | 10 degrees |
| Lateral part | 18 degrees |
Images
Sizes
| 2. Overall width | 3048 mm |
| 3. Height to cab upper part | 3930 mm |
| 4. Caterpillar track length on ground level | 3560 mm |
| 5. Clearance | 711 mm |
| 8. Rear platform swing radius | 1930 mm |
Carrier
| 6. Track width | 2430 mm |
| 7. Shoe dimensions | 609.6 mm |
Booms
| 9. Minimum cutting radius | 3530 mm |
| 10. Maximum cutting radius | 8300 mm |
