- Home/
- Specifications/
- Mining Excavator/
- Hitachi/
- EX2500
Mining. Mining Excavator Hitachi EX2500
Sizes
Height to cab upper part | 7040 mm |
Caterpillar track length | 7870 mm |
Width between caterpillar tracks | 6000 mm |
Caterpillar track length on ground level | 6120 mm |
Clearance | 800 mm |
Upper structure clearance | 2230 mm |
Caterpillar track height | 2060 mm |
Rear platform swing radius | 6290 mm |
Shovel boom/sections 1
Maximum cut height | 16160 mm |
Maximum unloading height | 10360 mm |
Maximum radius on ground level | 16500 mm |
Handle pressure force | 825 Nm |
Backhoe shovel boom / section | 9000mm boom with 4200mm with lever |
Maximum excavation depth | 8570 mm |
Maximum vertical wall digging depth | 5070 mm |
Shovel
Bucket initial volume | 15 m3 |
Operation
Fuel Capacity | 3600 l. |
Cooling system fluid volume | 380 l. |
Engine oil volume | 260 l. |
Hydraulic system fluid volume | 2950 l. |
Rotation speed | 3.8 rev / min |
Operating voltage | 24 V |
Generator current strength | 150 amperes |
Motor
Manufacturer | Cummins |
Model | QSK45-C |
Full power | 1006.7 kW |
Effective power | 970.9 kW |
Power measured at | 1800 rev / min |
Displacement | 45 l. |
Cylinders number | 12 |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) |
Loading bucket
Loading bucket | standard 15 cu. m |
Maximum excavation depth | 3720 mm |
Maximum cut height | 15010 mm |
Maximum unloading height | 10350 mm |
Maximum digging radius | 14060 mm |
Handle pressure force | 918 Nm |
Carrier
Maximum travel speed | 2.3 km/h |
Upper rollers number | 3 |
Lower rollers number | 8 |
Track shoes number on either side | 39 |
Track width | 5000 mm |
Backhoe shovel support width 1 | 1000 mm |
Unloaded backhoe shovel operational weight with support 1 | 239000 kg |
Excavator specific ground pressure with support 1 | 172 kPa |
Bucket loader support width | 1000 mm |
Loading shovel operational weight | 242000 kg |
Bucket loader specific ground pressure | 174 kPa |
Rear platform swing radius | 6290 mm |
Images
Sizes
2. Width between caterpillar tracks | 6000 mm |
4. Caterpillar track length on ground level | 6120 mm |
5. Clearance | 800 mm |
7. Height to cab upper part | 7040 mm |
8. Rear platform swing radius | 6290 mm |
Loading bucket
17. Maximum cut height | 15010 mm |
18. Maximum unloading height | 10350 mm |
19. Maximum digging radius | 14060 mm |
20. Maximum excavation depth | 3720 mm |
Carrier
6. Track width | 5000 mm |
14. Bucket loader support width | 1000 mm |