Mining. Wheel-Mounted Loader Caterpillar 980H
Sizes
| Height to cab upper part | 3765 mm |
| Clearance | 442 mm |
| Wheelbase | 3700 mm |
| Hinge axis maximum height | 4505 mm |
| Radius at maximum lifting and unloading | 1554 mm |
| Length with bucket on ground level | 9480 mm |
| Between tyres width | 3227 mm |
Shovel
| Breakout power | 273 kN |
| Unloading ground clearance at maximum lifting | 3305 mm |
| Shovel width | 3533 mm |
| Bucket capacity with top | 4.2 m3 |
| Brimmed bucket capacity | 3.7 m3 |
Operation
| Working weight | 30159 kg |
| Fuel Capacity | 479 l. |
| Hydraulic system fluid volume | 250 l. |
| Engine oil volume | 37.9 l. |
| Cooling system fluid volume | 83 l. |
| Transmission fluid volume | 62 l. |
| Front axle / differential fluid volume | 87 l. |
| Rear axle / differential fluid volume | 87 l. |
| Static tipping weight | 22767 kg |
| Turn radius | 7962 mm |
| Operating voltage | 24 V |
| Generator current strength | 80 amperes |
| Rear axle oscillating | 26 degrees |
| Tyre size | 29.5-25 |
Motor
| Manufacturer | Caterpillar |
| Model | C15 ACERT |
| Effective power | 237 kW |
| Full power | 264 kW |
| Power measured at | 1800 rev / min |
| Displacement | 15.2 l. |
| Cylinders number | 6 |
| Maximum torque | 1615 Nm |
Hydraulic system
| Type of pump | gear type pump |
| Overflow valve pressure | 20700 kPa |
| Pump bandwidth | 464 l/min |
| Lifting time | 6 sec |
| Unloading time | 2.1 sec |
| Lowering time | 3.4 sec |
Gear box
| Transmission type | powershift transmission |
| Forward gears number | 4 |
| Reverse gears number | 4 |
| Maximum forward speed | 36.3 km/h |
| Maximum reverse gear | 41.5 km/h |
Images
Sizes
| 1. Length with bucket on ground level | 9480 mm |
| 2. Between tyres width | 3227 mm |
| 3. Height to cab upper part | 3765 mm |
| 4. Wheelbase | 3700 mm |
| 5. Clearance | 442 mm |
| 6. Hinge axis maximum height | 4505 mm |
| 8. Radius at maximum lifting and unloading | 1554 mm |
Shovel
| 7. Unloading ground clearance at maximum lifting | 3305 mm |