- Home/
- Comparison/
- Square Baler/
- John Deere 328 vs. Case IH LBX332 Rotary Milling
John Deere 328 vs. Case IH LBX332 Rotary Milling
4 reasons to buy John Deere 328:
Sizes
Tractor mechanism required power of PTO | 26.1 kW and 96.9 kW | 73 % less or 70.8 kW |
Ram
Strokes per minute | 80 and 42 | 47 % more or 38 |
Press size
Bale minimum length | 310 mm and 1143 mm | 73 % less or 833 mm |
Baler
Tines number | 104 and 56 | 46 % more or 48 |
4 reasons to buy Case IH LBX332 Rotary Milling:
Press size
Bale maximum length | 2743.2 mm and 1270 mm | 54 % more or 1473.2 mm |
Bale width | 786.4 mm and 460 mm | 42 % more or 326.4 mm |
Bale height | 838.2 mm and 360 mm | 57 % more or 478.2 mm |
Packaging device
Twine coils volume | 30 and 4 | 87 % more or 26 |
Neutral reasons:
Sizes
Dimensional length | 5765 mm and 8863.6 mm |
Overall width | 2743 mm and 2566.4 mm |
Headroom | 1702 mm and 3124.2 mm |
Weight | 1208 kg and 8299.8 kg |
Ram
Length of stroke | 76 cm and 28 inch. |
Type of bearing | Rollers with ball bearings, sealed and 4 vertical, 2 horizontal rollers |
Packaging device
System type | plastic or sisal and 4 double knotter |
Baler
Tine to tine width | 1.6 m and 1.8 m |
Number of rods | 4 and 4 |
Type of lifting | crank arm and Hydraulic |
Images
Sizes
1. Dimensional length | 5765 mm | 1. Dimensional length | 8863.6 mm |
2. Overall width | 2743 mm | 2. Overall width | 2566.4 mm |
3. Headroom | 1702 mm | 3. Headroom | 3124.2 mm |