vs.

      Gleaner R75 vs. Salford CS6060 Lateral

      5 reasons to buy Gleaner R75:

      Purifying system

      Total purification area 5 m2 and 4.3 m2 14 % more or 0.7 m2

      Operation

      Fuel Capacity 568 l. and 450 l. 21 % more or 118 l.

      Motor

      Power 261 kW and 192.4 kW 26 % more or 68.6 kW

      Grain reception and processing

      Unloading rate 99 l/sec and 72 l/sec 27 % more or 27 l/sec
      Grain tank volume 11629 l. and 7000 l. 40 % more or 4629 l.

      2 reasons to buy Salford CS6060 Lateral:

      Threshing device

      Rotor high speed 1140 rev / min and 1096 rev / min 4 % more or 44 rev

      Operation

      Operational weight without attachment 11820 kg and 12927.4 kg 9 % less or 1107.4 kg

      Neutral reasons:

      Threshing device

      Rotor length 2235 mm and 1300 mm
      Low rotor speed 200 rev / min and 440 rev / min
      Rotor diameter 635 mm and 607 mm

      Sizes

      Dimensional length 7690 mm and 8160 mm
      Height to cab upper part 3580 mm and 3950 mm

      Separation/division

      Type of separator transversal and turning
      Separation zone 3 m2 and 5.4 m2

      Operation

      Transmission type 4 speed hydrostatic and hydrostatic

      Motor

      Power measured at 2100 rev / min and 2100 rev / min
      Manufacturer AGCO and New Holland
      Model 84 CTA and 6.7 I (*)

      Images

      Sizes

      1. Dimensional length 7690 mm 1. Dimensional length 8160 mm
      3. Height to cab upper part 3580 mm 3. Height to cab upper part 3950 mm