vs.

      Gleaner R75 vs. Salford CS6080

      3 reasons to buy Gleaner R75:

      Motor

      Power 261 kW and 192.4 kW 26 % more or 68.6 kW

      Grain reception and processing

      Unloading rate 99 l/sec and 72 l/sec 27 % more or 27 l/sec
      Grain tank volume 11629 l. and 8000 l. 31 % more or 3629 l.

      4 reasons to buy Salford CS6080:

      Threshing device

      Rotor high speed 1140 rev / min and 1096 rev / min 4 % more or 44 rev

      Purifying system

      Total purification area 5.2 m2 and 5 m2 4 % more or 0.2 m2

      Operation

      Operational weight without attachment 12130 kg and 12927.4 kg 6 % less or 797.4 kg
      Fuel Capacity 580 l. and 568 l. 2 % more or 12 l.

      Neutral reasons:

      Threshing device

      Rotor length 2235 mm and 1300 mm
      Low rotor speed 200 rev / min and 440 rev / min
      Rotor diameter 635 mm and 607 mm

      Sizes

      Height to cab upper part 3580 mm and 3950 mm
      Dimensional length 7690 mm and 8160 mm

      Separation/division

      Type of separator transversal and turning
      Separation zone 3 m2 and 6.5 m2

      Operation

      Transmission type 4 speed hydrostatic and hydrostatic

      Motor

      Model 84 CTA and 6.7 I (*)
      Power measured at 2100 rev / min and 2100 rev / min
      Manufacturer AGCO and New Holland

      Images

      Sizes

      1. Dimensional length 7690 mm 1. Dimensional length 8160 mm
      3. Height to cab upper part 3580 mm 3. Height to cab upper part 3950 mm