- Home/
- Comparison/
- Combine Harvester/
- Gleaner R75 vs. Salford CX8030
Gleaner R75 vs. Salford CX8030
5 reasons to buy Gleaner R75:
Threshing device
Rotor high speed | 1096 rev / min and 905 rev / min | 17 % more or 191 rev |
Purifying system
High cleaning fan speed | 1150 rev / min and 900 rev / min | 22 % more or 250 rev |
Operation
Fuel Capacity | 568 l. and 500 l. | 12 % more or 68 l. |
Motor
Power | 261 kW and 192.4 kW | 26 % more or 68.6 kW |
Grain reception and processing
Grain tank volume | 11629 l. and 7600 l. | 35 % more or 4029 l. |
3 reasons to buy Salford CX8030:
Purifying system
Total purification area | 5.4 m2 and 5 m2 | 7 % more or 0.4 m2 |
Operation
Operational weight without attachment | 12260 kg and 12927.4 kg | 5 % less or 667.4 kg |
Grain reception and processing
Unloading rate | 110 l/sec and 99 l/sec | 10 % more or 11 l/sec |
Neutral reasons:
Threshing device
Concave zone | 0.54 m2 and 0.98 m2 |
Rotor diameter | 635 mm and 750 mm |
Rotor length | 2235 mm and 1300 mm |
Low rotor speed | 200 rev / min and 305 rev / min |
Sizes
Height to cab upper part | 3580 mm and 3930 mm |
Dimensional length | 7690 mm and 9070 mm |
Separation/division
Type of separator | transversal and turning |
Separation zone | 3 m2 and 4.9 m2 |
Operation
Transmission type | 4 speed hydrostatic and hydrostatic |
Motor
Manufacturer | AGCO and New Holland |
Power measured at | 2100 rev / min and 2100 rev / min |
Images
Sizes
1. Dimensional length | 7690 mm | 1. Dimensional length | 9070 mm |
3. Height to cab upper part | 3580 mm | 3. Height to cab upper part | 3930 mm |