vs.

      New Holland CX860 vs. Gleaner R75

      3 reasons to buy New Holland CX860:

      Purifying system

      Total purification area 6.5 m2 and 5 m2 23 % more or 1.5 m2

      Operation

      Fuel Capacity 749.5 l. and 568 l. 24 % more or 181.5 l.

      Grain reception and processing

      Unloading rate 105.7 l/sec and 99 l/sec 6 % more or 6.7 l/sec

      6 reasons to buy Gleaner R75:

      Threshing device

      Rotor high speed 1096 rev / min and 905 rev / min 17 % more or 191 rev

      Purifying system

      High cleaning fan speed 1150 rev / min and 900 rev / min 22 % more or 250 rev

      Operation

      Operational weight without attachment 12927.4 kg and 15499.7 kg 17 % less or 2572.3 kg

      Motor

      Power 261 kW and 246.1 kW 6 % more or 14.9 kW
      Displacement 8.4 l. and 7.8 l. 7 % more or 0.6 l.

      Grain reception and processing

      Grain tank volume 11629 l. and 11628.9 l. 0 % more or 0.1 l.

      Neutral reasons:

      Threshing device

      Rotor diameter 750 mm and 635 mm
      Rotor length 1574.8 mm and 2235 mm
      Low rotor speed 305 rev / min and 200 rev / min
      Concave zone 1.2 m2 and 0.54 m2

      Sizes

      Height to cab upper part 3962.4 mm and 3580 mm
      Dimensional length 9052.6 mm and 7690 mm

      Separation/division

      Separation zone 7.2 m2 and 3 m2

      Operation

      Transmission type Hydrostatic drive, 4-speed gearbox and 4 speed hydrostatic

      Motor

      Manufacturer New Holland and AGCO
      Power measured at 2100 rev / min and 2100 rev / min

      Images

      Sizes

      1. Dimensional length 9052.6 mm 1. Dimensional length 7690 mm
      3. Height to cab upper part 3962.4 mm 3. Height to cab upper part 3580 mm