vs.

      Salford CS6050 vs. New Holland CX880

      2 reasons to buy Salford CS6050:

      Threshing device

      Rotor high speed 1140 rev / min and 905 rev / min 21 % more or 235 rev

      Operation

      Operational weight without attachment 10820 kg and 15799.5 kg 32 % less or 4979.5 kg

      6 reasons to buy New Holland CX880:

      Purifying system

      Total purification area 6.5 m2 and 4.3 m2 34 % more or 2.2 m2

      Operation

      Fuel Capacity 749.5 l. and 450 l. 40 % more or 299.5 l.
      Gears number 4 and 3 25 % more or 1

      Motor

      Power 275.9 kW and 179.7 kW 35 % more or 96.2 kW

      Grain reception and processing

      Grain tank volume 11628.9 l. and 7000 l. 40 % more or 4628.9 l.
      Unloading rate 105.7 l/sec and 72 l/sec 32 % more or 33.7 l/sec

      Neutral reasons:

      Threshing device

      Rotor diameter 607 mm and 750 mm
      Rotor length 1300 mm and 1574.8 mm
      Low rotor speed 440 rev / min and 305 rev / min

      Sizes

      Dimensional length 8160 mm and 9052.6 mm
      Between tyres width 3180 mm and 4337.3 mm
      Height to cab upper part 3950 mm and 3962.4 mm

      Separation/division

      Separator length 590 mm and 3670.3 mm
      Separation zone 5.4 m2 and 7.2 m2

      Purifying system

      Self-alignment 25% and there is

      Operation

      Transmission type hydrostatic and Hydrostatic drive, 4-speed gearbox

      Motor

      Power measured at 2100 rev / min and 2100 rev / min
      Manufacturer New Holland and New Holland

      Images

      Sizes

      2. Between tyres width 3180 mm 2. Between tyres width 4337.3 mm
      3. Height to cab upper part 3950 mm 3. Height to cab upper part 3962.4 mm
      1. Dimensional length 8160 mm 1. Dimensional length 9052.6 mm