vs.

      Salford CS6080 vs. Salford CX8060

      2 reasons to buy Salford CS6080:

      Threshing device

      Rotor high speed 1140 rev / min and 905 rev / min 21 % more or 235 rev

      Operation

      Operational weight without attachment 12130 kg and 13300 kg 9 % less or 1170 kg

      7 reasons to buy Salford CX8060:

      Purifying system

      Total purification area 6.5 m2 and 5.2 m2 20 % more or 1.3 m2

      Operation

      Fuel Capacity 750 l. and 580 l. 23 % more or 170 l.
      Gears number 4 and 3 25 % more or 1

      Motor

      Power 223 kW and 192.4 kW 14 % more or 30.6 kW
      Forced pressurization power 248.3 kW and 202.8 kW 18 % more or 45.5 kW

      Grain reception and processing

      Grain tank volume 9000 l. and 8000 l. 11 % more or 1000 l.
      Unloading rate 110 l/sec and 72 l/sec 35 % more or 38 l/sec

      Neutral reasons:

      Threshing device

      Rotor diameter 607 mm and 750 mm
      Rotor length 1300 mm and 1560 mm
      Low rotor speed 440 rev / min and 305 rev / min

      Sizes

      Height to cab upper part 3950 mm and 3920 mm
      Dimensional length 8160 mm and 9070 mm
      Between tyres width 3407 mm and 3300 mm

      Separation/division

      Type of separator turning and turning
      Separation zone 6.5 m2 and 5.9 m2

      Operation

      Transmission type hydrostatic and hydrostatic

      Motor

      Manufacturer New Holland and Iveco
      Model 6.7 I (*) and Cursor 9
      Power measured at 2100 rev / min and 2100 rev / min

      Images

      Sizes

      1. Dimensional length 8160 mm 1. Dimensional length 9070 mm
      2. Between tyres width 3407 mm 2. Between tyres width 3300 mm
      3. Height to cab upper part 3950 mm 3. Height to cab upper part 3920 mm