- Home/
- Comparison/
- Combine Harvester/
- Salford CX8030 vs. Salford CS6050
Salford CX8030 vs. Salford CS6050
7 reasons to buy Salford CX8030:
Purifying system
Total purification area | 5.4 m2 and 4.3 m2 | 20 % more or 1.1 m2 |
Operation
Fuel Capacity | 500 l. and 450 l. | 10 % more or 50 l. |
Gears number | 4 and 3 | 25 % more or 1 |
Motor
Forced pressurization power | 202.8 kW and 180.5 kW | 11 % more or 22.3 kW |
Power | 192.4 kW and 179.7 kW | 7 % more or 12.7 kW |
Grain reception and processing
Grain tank volume | 7600 l. and 7000 l. | 8 % more or 600 l. |
Unloading rate | 110 l/sec and 72 l/sec | 35 % more or 38 l/sec |
2 reasons to buy Salford CS6050:
Threshing device
Rotor high speed | 1140 rev / min and 905 rev / min | 21 % more or 235 rev |
Operation
Operational weight without attachment | 10820 kg and 12260 kg | 12 % less or 1440 kg |
Neutral reasons:
Threshing device
Rotor length | 1300 mm and 1300 mm |
Low rotor speed | 305 rev / min and 440 rev / min |
Rotor diameter | 750 mm and 607 mm |
Sizes
Between tyres width | 3000 mm and 3180 mm |
Height to cab upper part | 3930 mm and 3950 mm |
Dimensional length | 9070 mm and 8160 mm |
Separation/division
Type of separator | turning and turning |
Separation zone | 4.9 m2 and 5.4 m2 |
Operation
Transmission type | hydrostatic and hydrostatic |
Motor
Power measured at | 2100 rev / min and 2100 rev / min |
Manufacturer | New Holland and New Holland |
Images
Sizes
1. Dimensional length | 9070 mm | 1. Dimensional length | 8160 mm |
2. Between tyres width | 3000 mm | 2. Between tyres width | 3180 mm |
3. Height to cab upper part | 3930 mm | 3. Height to cab upper part | 3950 mm |