vs.

      Salford CX8070 vs. Salford TX63

      7 reasons to buy Salford CX8070:

      Purifying system

      Total purification area 6.5 m2 and 5.4 m2 17 % more or 1.1 m2
      Low cleaning fan speed 475 rev / min and 435 rev / min 8 % more or 40 rev
      High cleaning fan speed 900 rev / min and 860 rev / min 4 % more or 40 rev

      Operation

      Fuel Capacity 750 l. and 450 l. 40 % more or 300 l.

      Motor

      Power 243.1 kW and 177.5 kW 27 % more or 65.6 kW

      Grain reception and processing

      Grain tank volume 9000 l. and 7200 l. 20 % more or 1800 l.
      Unloading rate 110 l/sec and 72 l/sec 35 % more or 38 l/sec

      2 reasons to buy Salford TX63:

      Threshing device

      Rotor high speed 1140 rev / min and 905 rev / min 21 % more or 235 rev

      Operation

      Operational weight without attachment 10015 kg and 13520 kg 26 % less or 3505 kg

      Neutral reasons:

      Threshing device

      Rotor length 1560 mm and 1300 mm
      Low rotor speed 305 rev / min and 385 rev / min
      Concave zone 1.2 m2 and 0.72 m2
      Rotor diameter 750 mm and 606 mm

      Sizes

      Height to cab upper part 3960 mm and 3950 mm
      Dimensional length 9070 mm and 8120 mm
      Between tyres width 3500 mm and 3219 mm

      Separation/division

      Type of separator turning and turning

      Operation

      Transmission type hydrostatic and hydrostatic
      Gears number 4 and 4

      Motor

      Power measured at 2100 rev / min and 2100 rev / min
      Model Cursor 9 and NH 675 TA/CB

      Images

      Sizes

      1. Dimensional length 9070 mm 1. Dimensional length 8120 mm
      2. Between tyres width 3500 mm 2. Between tyres width 3219 mm
      3. Height to cab upper part 3960 mm 3. Height to cab upper part 3950 mm