vs.

      Salford CX8080 vs. Salford CS6080

      7 reasons to buy Salford CX8080:

      Purifying system

      Total purification area 6.5 m2 and 5.2 m2 20 % more or 1.3 m2

      Operation

      Fuel Capacity 1000 l. and 580 l. 42 % more or 420 l.
      Gears number 4 and 3 25 % more or 1

      Motor

      Forced pressurization power 271.4 kW and 202.8 kW 25 % more or 68.6 kW
      Power 243.1 kW and 192.4 kW 21 % more or 50.7 kW

      Grain reception and processing

      Grain tank volume 10500 l. and 8000 l. 24 % more or 2500 l.
      Unloading rate 110 l/sec and 72 l/sec 35 % more or 38 l/sec

      2 reasons to buy Salford CS6080:

      Threshing device

      Rotor high speed 1140 rev / min and 905 rev / min 21 % more or 235 rev

      Operation

      Operational weight without attachment 12130 kg and 13520 kg 10 % less or 1390 kg

      Neutral reasons:

      Threshing device

      Low rotor speed 305 rev / min and 440 rev / min
      Rotor diameter 750 mm and 607 mm
      Rotor length 1560 mm and 1300 mm

      Sizes

      Height to cab upper part 3920 mm and 3950 mm
      Dimensional length 9070 mm and 8160 mm
      Between tyres width 3700 mm and 3407 mm

      Separation/division

      Type of separator turning and turning
      Separation zone 5.9 m2 and 6.5 m2

      Operation

      Transmission type hydrostatic and hydrostatic

      Motor

      Power measured at 2100 rev / min and 2100 rev / min
      Manufacturer Iveco and New Holland
      Model Cursor 9 and 6.7 I (*)

      Images

      Sizes

      2. Between tyres width 3700 mm 2. Between tyres width 3407 mm
      3. Height to cab upper part 3920 mm 3. Height to cab upper part 3950 mm
      1. Dimensional length 9070 mm 1. Dimensional length 8160 mm