- Home/
- Comparison/
- Combine Harvester/
- Salford TC5040 vs. Salford CS6050
Salford TC5040 vs. Salford CS6050
2 reasons to buy Salford TC5040:
Operation
Operational weight without attachment | 7600 kg and 10820 kg | 30 % less or 3220 kg |
Gears number | 4 and 3 | 25 % more or 1 |
7 reasons to buy Salford CS6050:
Threshing device
Rotor high speed | 1140 rev / min and 1070 rev / min | 6 % more or 70 rev |
Purifying system
Total purification area | 4.3 m2 and 3.3 m2 | 23 % more or 1.0 m2 |
Operation
Fuel Capacity | 450 l. and 300 l. | 33 % more or 150 l. |
Motor
Power | 179.7 kW and 126.8 kW | 29 % more or 52.9 kW |
Forced pressurization power | 180.5 kW and 130.5 kW | 28 % more or 50.0 kW |
Grain reception and processing
Grain tank volume | 7000 l. and 4000 l. | 43 % more or 3000 l. |
Unloading rate | 72 l/sec and 60 l/sec | 17 % more or 12 l/sec |
Neutral reasons:
Threshing device
Rotor length | 1040 mm and 1300 mm |
Low rotor speed | 430 rev / min and 440 rev / min |
Rotor diameter | 607 mm and 607 mm |
Sizes
Dimensional length | 8135 mm and 8160 mm |
Between tyres width | 3315 mm and 3180 mm |
Separation/division
Type of separator | turning and turning |
Purifying system
Self-alignment | 23% and 25% |
Operation
Transmission type | mechanical transmission and hydrostatic |
Motor
Power measured at | 2100 rev / min and 2100 rev / min |
Manufacturer | New Holland and New Holland |
Model | 6.8 I and 6.7 I (*) |
Images
Sizes
1. Dimensional length | 8135 mm | 1. Dimensional length | 8160 mm |
2. Between tyres width | 3315 mm | 2. Between tyres width | 3180 mm |