vs.

      Salford TC5050 vs. Salford CX8060

      3 reasons to buy Salford TC5050:

      Threshing device

      Rotor high speed 1070 rev / min and 905 rev / min 15 % more or 165 rev

      Purifying system

      High cleaning fan speed 1000 rev / min and 900 rev / min 10 % more or 100 rev

      Operation

      Operational weight without attachment 7600 kg and 13300 kg 43 % less or 5700 kg

      7 reasons to buy Salford CX8060:

      Purifying system

      Low cleaning fan speed 475 rev / min and 350 rev / min 26 % more or 125 rev
      Total purification area 6.5 m2 and 3.3 m2 49 % more or 3.2 m2

      Operation

      Fuel Capacity 750 l. and 300 l. 60 % more or 450 l.

      Motor

      Power 223 kW and 126.8 kW 43 % more or 96.2 kW
      Forced pressurization power 248.3 kW and 130.5 kW 47 % more or 117.8 kW

      Grain reception and processing

      Grain tank volume 9000 l. and 4000 l. 56 % more or 5000 l.
      Unloading rate 110 l/sec and 60 l/sec 45 % more or 50 l/sec

      Neutral reasons:

      Threshing device

      Rotor diameter 607 mm and 750 mm
      Rotor length 1040 mm and 1560 mm
      Low rotor speed 430 rev / min and 305 rev / min

      Sizes

      Dimensional length 8135 mm and 9070 mm
      Between tyres width 3315 mm and 3300 mm

      Separation/division

      Type of separator turning and turning

      Operation

      Gears number 4 and 4
      Transmission type hydro- and hydrostatic

      Motor

      Manufacturer New Holland and Iveco
      Model 6.8 I and Cursor 9
      Power measured at 2100 rev / min and 2100 rev / min

      Images

      Sizes

      1. Dimensional length 8135 mm 1. Dimensional length 9070 mm
      2. Between tyres width 3315 mm 2. Between tyres width 3300 mm