vs.

      Salford TC5050 vs. Salford CX8080

      3 reasons to buy Salford TC5050:

      Threshing device

      Rotor high speed 1070 rev / min and 905 rev / min 15 % more or 165 rev

      Purifying system

      High cleaning fan speed 1000 rev / min and 900 rev / min 10 % more or 100 rev

      Operation

      Operational weight without attachment 7600 kg and 13520 kg 44 % less or 5920 kg

      7 reasons to buy Salford CX8080:

      Purifying system

      Total purification area 6.5 m2 and 3.3 m2 49 % more or 3.2 m2
      Low cleaning fan speed 475 rev / min and 350 rev / min 26 % more or 125 rev

      Operation

      Fuel Capacity 1000 l. and 300 l. 70 % more or 700 l.

      Motor

      Power 243.1 kW and 126.8 kW 48 % more or 116.3 kW
      Forced pressurization power 271.4 kW and 130.5 kW 52 % more or 140.9 kW

      Grain reception and processing

      Grain tank volume 10500 l. and 4000 l. 62 % more or 6500 l.
      Unloading rate 110 l/sec and 60 l/sec 45 % more or 50 l/sec

      Neutral reasons:

      Threshing device

      Low rotor speed 430 rev / min and 305 rev / min
      Rotor diameter 607 mm and 750 mm
      Rotor length 1040 mm and 1560 mm

      Sizes

      Dimensional length 8135 mm and 9070 mm
      Between tyres width 3315 mm and 3700 mm

      Separation/division

      Type of separator turning and turning

      Operation

      Transmission type hydro- and hydrostatic
      Gears number 4 and 4

      Motor

      Power measured at 2100 rev / min and 2100 rev / min
      Manufacturer New Holland and Iveco
      Model 6.8 I and Cursor 9

      Images

      Sizes

      1. Dimensional length 8135 mm 1. Dimensional length 9070 mm
      2. Between tyres width 3315 mm 2. Between tyres width 3700 mm