vs.

      New Holland TN75A vs. ITM 399

      5 reasons to buy New Holland TN75A:

      Operation

      Generator current strength 85 amperes and 45 amperes 47 % more or 40 amperes
      Turn radius 3628 mm and 4214.5 mm 14 % less or 586.5 mm

      Motor

      Power measured at 2300 rev / min and 2250 rev / min 2 % more or 50 rev
      Torque measured at 1400 rev / min and 1200 rev / min 14 % more or 200 rev

      Hydraulic system

      Pump bandwidth 64 l/min and 27.6 l/min 57 % more or 36.4 l/min

      6 reasons to buy ITM 399:

      Operation

      Fuel Capacity 126 l. and 87 l. 31 % more or 39 l.
      Three-point hitch load-carrying capacity at 24 inches 3678 kg and 1800 kg 51 % more or 1878 kg

      Motor

      Full power 82.8 kW and 55.9 kW 32 % more or 26.9 kW
      Maximum torque 430 Nm and 298.3 Nm 31 % more or 131.7 Nm
      Cylinders number 6 and 3 50 % more or 3
      Displacement 6 l. and 2.9 l. 52 % more or 3.1 l.

      Neutral reasons:

      Sizes

      Dimensional length 3894 mm and 4330 mm
      Height with rollover protection system 2416 mm and 2629 mm
      Height without rollover protection system 1908 mm and 1906 mm
      Wheelbase 2070 mm and 2580 mm

      Operation

      Rear tyres size 2wd/4wd 14.9x28 and 18.4-34
      Operating voltage 12 V and 12 V
      Front tyres size 2wd / 4wd 9.5x15 and 7.5-18

      Motor

      Power take mechanism power 46.2 kW and 70.9 kW

      Hydraulic system

      Overflow valve pressure 18995 kPa and 20700 kPa

      Gear box

      Transmission type 8x8 full mesh transmission with synchronized mechanical drive and synchronizer

      Images

      Sizes

      6. Height without rollover protection system 1908 mm 6. Height without rollover protection system 1906 mm
      1. Dimensional length 3894 mm 1. Dimensional length 4330 mm
      3. Height with rollover protection system 2416 mm 3. Height with rollover protection system 2629 mm
      4. Wheelbase 2070 mm 4. Wheelbase 2580 mm