vs.

      John Deere 100F Open Position vs. John Deere 8230 200 Power Take Horsepower

      2 reasons to buy John Deere 100F Open Position:

      Operation

      Turn radius 2900 mm and 5680 mm 49 % less or 2780 mm

      Motor

      Power measured at 2600 rev / min and 2100 rev / min 19 % more or 500 rev

      9 reasons to buy John Deere 8230 200 Power Take Horsepower:

      Operation

      Three-point hitch load-carrying capacity at 24 inches 5625 kg and 2500 kg 56 % more or 3125 kg
      Fuel Capacity 681 l. and 60 l. 91 % more or 621 l.

      Motor

      Displacement 9 l. and 3 l. 67 % more or 6 l.
      Full power 182.7 kW and 71.3 kW 61 % more or 111.4 kW
      Maximum torque 1003.3 Nm and 339 Nm 66 % more or 664.3 Nm
      Torque measured at 1502 rev / min and 1300 rev / min 13 % more or 202 rev
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 166.6 l/min and 35 l/min 79 % more or 131.6 l/min
      Remote control valves number 3 and 1 67 % more or 2

      Neutral reasons:

      Sizes

      Wheelbase 1956 mm and 3050 mm

      Operation

      Front tyres size 2wd / 4wd 240/70x16 and 420/90R30
      Rear tyres size 2wd/4wd 380/70x20 and 480/80R46

      Motor

      Aspiration turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Manufacturer VM and John Deere
      Power take mechanism power 61.9 kW and 151.9 kW

      Hydraulic system

      Overflow valve pressure 19498.4 kPa and 20615.3 kPa

      Gear box

      Transmission type 8+8/16+8 synchronized reversing gear and powershift transmission

      Images

      Sizes

      4. Wheelbase 1956 mm 4. Wheelbase 3050 mm