vs.

      John Deere 7930 180 Power Take Horsepower - IVT vs. John Deere 8230 200 Power Take Horsepower

      3 reasons to buy John Deere 7930 180 Power Take Horsepower - IVT:

      Operation

      Turn radius 5105.4 mm and 5680 mm 10 % less or 574.6 mm

      Motor

      Torque measured at 1602 rev / min and 1502 rev / min 6 % more or 100 rev

      Gear box

      Reverse gears number 16 and 4 75 % more or 12

      7 reasons to buy John Deere 8230 200 Power Take Horsepower:

      Operation

      Fuel Capacity 681 l. and 390 l. 43 % more or 291 l.
      Three-point hitch load-carrying capacity at 24 inches 5625 kg and 4983 kg 11 % more or 642 kg

      Motor

      Maximum torque 1003.3 Nm and 874.5 Nm 13 % more or 128.8 Nm
      Full power 182.7 kW and 164.1 kW 10 % more or 18.6 kW
      Displacement 9 l. and 6.8 l. 24 % more or 2.2 l.

      Hydraulic system

      Remote control valves number 3 and 2 33 % more or 1
      Pump bandwidth 166.6 l/min and 121.1 l/min 27 % more or 45.5 l/min

      Neutral reasons:

      Sizes

      Wheelbase 2860 mm and 3050 mm

      Operation

      Front tyres size 2wd / 4wd 420/90R30 (R1) and 420/90R30
      Rear tyres size 2wd/4wd 480/80R46 (R1) and 480/80R46

      Motor

      Manufacturer John Deere and John Deere
      Cylinders number 6 and 6
      Power take mechanism power 136.4 kW and 151.9 kW
      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Power measured at 2100 rev / min and 2100 rev / min

      Hydraulic system

      Overflow valve pressure 20091.3 kPa and 20615.3 kPa

      Gear box

      Transmission type PowrQuad PLUS and powershift transmission
      Forward gears number 16 and 16

      Images

      Sizes

      4. Wheelbase 2860 mm 4. Wheelbase 3050 mm