- Home/
- Comparison/
- Tractor with Mechanical Front-Wheel Drive/
- John Deere 8430 250 Power Take Horsepower - PST vs. John Deere 7930 180 Power Take Horsepower - IVT
John Deere 8430 250 Power Take Horsepower - PST vs. John Deere 7930 180 Power Take Horsepower - IVT
7 reasons to buy John Deere 8430 250 Power Take Horsepower - PST:
Operation
Fuel Capacity | 681 l. and 390 l. | 43 % more or 291 l. |
Three-point hitch load-carrying capacity at 24 inches | 6895 kg and 4983 kg | 28 % more or 1912 kg |
Motor
Full power | 227.4 kW and 164.1 kW | 28 % more or 63.3 kW |
Maximum torque | 1260.9 Nm and 874.5 Nm | 31 % more or 386.4 Nm |
Displacement | 9 l. and 6.8 l. | 24 % more or 2.2 l. |
Hydraulic system
Pump bandwidth | 166.6 l/min and 121.1 l/min | 27 % more or 45.5 l/min |
Remote control valves number | 3 and 2 | 33 % more or 1 |
3 reasons to buy John Deere 7930 180 Power Take Horsepower - IVT:
Operation
Turn radius | 5105.4 mm and 6420 mm | 20 % less or 1314.6 mm |
Motor
Torque measured at | 1602 rev / min and 1500 rev / min | 6 % more or 102 rev |
Gear box
Reverse gears number | 16 and 4 | 75 % more or 12 |
Neutral reasons:
Sizes
Wheelbase | 3050 mm and 2860 mm |
Operation
Front tyres size 2wd / 4wd | 420/85R34 and 420/90R30 (R1) |
Rear tyres size 2wd/4wd | 480/80R50 and 480/80R46 (R1) |
Motor
Manufacturer | John Deere and John Deere |
Power take mechanism power | 188.7 kW and 136.4 kW |
Power measured at | 2100 rev / min and 2100 rev / min |
Cylinders number | 6 and 6 |
Aspiration | Turbocharged engine with subsequent cooling of charging air by oncoming air flow and Turbocharged engine with subsequent cooling of charging air by oncoming air flow |
Hydraulic system
Overflow valve pressure | 14858.2 kPa and 20091.3 kPa |
Gear box
Forward gears number | 16 and 16 |
Transmission type | powershift transmission and PowrQuad PLUS |
Images
Sizes
4. Wheelbase | 3050 mm | 4. Wheelbase | 2860 mm |