vs.

      AGCO GT75A vs. New Holland T9050

      4 reasons to buy AGCO GT75A:

      Operation

      Turn radius 3810 mm and 5100 mm 25 % less or 1290 mm

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Gear box

      Forward gears number 20 and 16 20 % more or 4
      Reverse gears number 10 and 2 80 % more or 8

      6 reasons to buy New Holland T9050:

      Operation

      Three-point hitch load-carrying capacity at 24 inches 8900 kg and 1596.6 kg 82 % more or 7303.4 kg
      Fuel Capacity 1135.6 l. and 89.7 l. 92 % more or 1045.9 l.

      Motor

      Displacement 12.9 l. and 4 l. 69 % more or 8.9 l.
      Full power 398.9 kW and 61.9 kW 84 % more or 337.0 kW

      Hydraulic system

      Pump bandwidth 151.4 l/min and 86 l/min 43 % more or 65.4 l/min
      Remote control valves number 4 and 2 50 % more or 2

      Neutral reasons:

      Sizes

      Dimensional length 3850 mm and 7558 mm
      Height to cab upper part 2692 mm and 3818 mm
      Wheelbase 2184 mm and 3911 mm
      Outer frame width 1948 mm and 1116 mm

      Operation

      Working weight 2960 kg and 24494 kg
      Three-point attachment type Cat. II and Cat. IV-N

      Motor

      Aspiration turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow

      Gear box

      Transmission type transmission with synchronizer and powershift

      Axle

      Last transmission inner planetary and Internal 4-planetary gear

      Images

      Sizes

      1. Dimensional length 3850 mm 1. Dimensional length 7558 mm
      2. Outer frame width 1948 mm 2. Outer frame width 1116 mm
      3. Height to cab upper part 2692 mm 3. Height to cab upper part 3818 mm
      4. Wheelbase 2184 mm 4. Wheelbase 3911 mm