vs.

      Daedong DK751(C) vs. New Holland T9020

      2 reasons to buy Daedong DK751(C):

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Gear box

      Reverse gears number 12 and 2 83 % more or 10

      9 reasons to buy New Holland T9020:

      Operation

      Three-point hitch load-carrying capacity at 24 inches 7107 kg and 2400 kg 66 % more or 4707 kg
      Fuel Capacity 757.1 l. and 100 l. 87 % more or 657.1 l.
      Cooling system fluid volume 47.3 l. and 18.5 l. 61 % more or 28.8 l.
      Engine oil volume 27.7 l. and 10.5 l. 62 % more or 17.2 l.

      Motor

      Displacement 9 l. and 4.4 l. 51 % more or 4.6 l.
      Full power 274.4 kW and 54 kW 80 % more or 220.4 kW

      Hydraulic system

      Pump bandwidth 151.4 l/min and 45.3 l/min 70 % more or 106.1 l/min
      Remote control valves number 4 and 2 50 % more or 2

      Gear box

      Forward gears number 16 and 12 25 % more or 4

      Neutral reasons:

      Sizes

      Wheelbase 2142 mm and 3531 mm
      Dimensional length 4205 mm and 7010 mm
      Tyre size Front 11.2-24 Rear 18.4-30 and 20.8R42
      Height to cab upper part 2735 mm and 3608 mm

      Operation

      Working weight 3331 kg and 17962 kg
      Operating voltage 12 V and 12 V
      Three-point attachment type Cat. 3 and Cat. IV-N/III

      Motor

      Manufacturer Daedong and New Holland

      Gear box

      Transmission type synchronizer and powershift

      Images

      Sizes

      1. Dimensional length 4205 mm 1. Dimensional length 7010 mm
      3. Height to cab upper part 2735 mm 3. Height to cab upper part 3608 mm
      4. Wheelbase 2142 mm 4. Wheelbase 3531 mm