- Home/
- Comparison/
- Four-Wheel Drive Tractor/
- Daedong DK901(C) vs. New Holland TM175
Daedong DK901(C) vs. New Holland TM175
1 reasons to buy Daedong DK901(C):
Gear box
Reverse gears number | 12 and 6 | 50 % more or 6 |
10 reasons to buy New Holland TM175:
Sizes
Clearance | 470 mm and 443 mm | 6 % more or 27 mm |
Operation
Cooling system fluid volume | 26.1 l. and 18.5 l. | 29 % more or 7.6 l. |
Three-point hitch load-carrying capacity at 24 inches | 7749.6 kg and 2400 kg | 69 % more or 5349.6 kg |
Fuel Capacity | 397.8 l. and 100 l. | 75 % more or 297.8 l. |
Engine oil volume | 19 l. and 10.5 l. | 45 % more or 8.5 l. |
Motor
Displacement | 7.5 l. and 4.4 l. | 41 % more or 3.1 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Hydraulic system
Remote control valves number | 4 and 2 | 50 % more or 2 |
Pump bandwidth | 120 l/min and 45.3 l/min | 62 % more or 74.7 l/min |
Gear box
Forward gears number | 18 and 12 | 33 % more or 6 |
Neutral reasons:
Sizes
Tyre size | Front 11.2-24 Rear 18.4-30 and 14.9R28/18.4R38 |
Dimensional length | 4330 mm and 4813 mm |
Height to cab upper part | 2735 mm and 2881 mm |
Wheelbase | 2142 mm and 2816 mm |
Operation
Three-point attachment type | Cat. 3 and Cat. II/IIIN |
Working weight | 3557 kg and 6250.5 kg |
Operating voltage | 12 V and 12 V |
Motor
Power measured at | 2200 rev / min and 2200 rev / min |
Aspiration | turbocharging and Turbocharged engine with intermediate cooling of charging air by oncoming air flow |
Gear box
Transmission type | synchronizer and Power Command powershift |
Images
Sizes
4. Wheelbase | 2142 mm | 4. Wheelbase | 2816 mm |
5. Clearance | 443 mm | 5. Clearance | 470 mm |
1. Dimensional length | 4330 mm | 1. Dimensional length | 4813 mm |
3. Height to cab upper part | 2735 mm | 3. Height to cab upper part | 2881 mm |