- Home/
- Comparison/
- Four-Wheel Drive Tractor/
- ITM 285 vs. Massey Ferguson MF 6495
ITM 285 vs. Massey Ferguson MF 6495
1 reasons to buy ITM 285:
Operation
Turn radius | 3800 mm and 5059.7 mm | 25 % less or 1259.7 mm |
8 reasons to buy Massey Ferguson MF 6495:
Operation
Three-point hitch load-carrying capacity at 24 inches | 7480 kg and 2227 kg | 70 % more or 5253 kg |
Generator current strength | 120 amperes and 45 amperes | 62 % more or 75 amperes |
Fuel Capacity | 355 l. and 90 l. | 75 % more or 265 l. |
Motor
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Displacement | 6.6 l. and 4.1 l. | 38 % more or 2.5 l. |
Hydraulic system
Pump bandwidth | 110 l/min and 16.7 l/min | 85 % more or 93.3 l/min |
Gear box
Forward gears number | 24 and 8 | 67 % more or 16 |
Reverse gears number | 24 and 2 | 92 % more or 22 |
Neutral reasons:
Sizes
Dimensional length | 4010 mm and 5435 mm |
Height to cab upper part | 2528 mm and 3048 mm |
Wheelbase | 2290 mm and 2996 mm |
Tyre size | Front 12.4-24 Rear 18.4/15-30 and Front 14.9R30 Rear 18.4R42 |
Outer frame width | 2060 mm and 2334 mm |
Operation
Working weight | 3114 kg and 6486 kg |
Three-point attachment type | Cat. 3 and Cat. 3/3N |
Motor
Manufacturer | Motorsazan and Sisu |
Model | A4-248 and 66 CTA |
Power take mechanism power | 47.3 kW and 115.6 kW |
Hydraulic system
Overflow valve pressure | 23300 kPa and 20000 kPa |
Gear box
Transmission type | Sliding spur gear and Dyna-6 |
Images
Sizes
1. Dimensional length | 4010 mm | 1. Dimensional length | 5435 mm |
2. Outer frame width | 2060 mm | 2. Outer frame width | 2334 mm |
3. Height to cab upper part | 2528 mm | 3. Height to cab upper part | 3048 mm |
4. Wheelbase | 2290 mm | 4. Wheelbase | 2996 mm |