- Home/
- Comparison/
- Four-Wheel Drive Tractor/
- ITM 399 vs. Daedong DK751(C)
ITM 399 vs. Daedong DK751(C)
9 reasons to buy ITM 399:
Operation
Engine oil volume | 14.3 l. and 10.5 l. | 27 % more or 3.8 l. |
Three-point hitch load-carrying capacity at 24 inches | 3678 kg and 2400 kg | 35 % more or 1278 kg |
Fuel Capacity | 126 l. and 100 l. | 21 % more or 26 l. |
Cooling system fluid volume | 25 l. and 18.5 l. | 26 % more or 6.5 l. |
Motor
Full power | 83 kW and 54 kW | 35 % more or 29 kW |
Power measured at | 2250 rev / min and 2200 rev / min | 2 % more or 50 rev |
Displacement | 6 l. and 4.4 l. | 27 % more or 1.6 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Gear box
Maximum speed | 30.2 km/h and 29.6 km/h | 2 % more or 0.6 km/h |
2 reasons to buy Daedong DK751(C):
Hydraulic system
Pump bandwidth | 45.3 l/min and 27.6 l/min | 39 % more or 17.7 l/min |
Gear box
Reverse gears number | 12 and 4 | 67 % more or 8 |
Neutral reasons:
Sizes
Dimensional length | 4330 mm and 4205 mm |
Wheelbase | 2640 mm and 2142 mm |
Tyre size | Front 14.9-24 Rear 18.4-34 and Front 11.2-24 Rear 18.4-30 |
Operation
Three-point attachment type | Cat. 3 and Cat. 3 |
Operating voltage | 12 V and 12 V |
Working weight | 3586 kg and 3331 kg |
Motor
Model | 1006.6 and 1104C-44 |
Manufacturer | Motorsazan and Daedong |
Gear box
Transmission type | synchronizer and synchronizer |
Forward gears number | 12 and 12 |
Images
Sizes
1. Dimensional length | 4330 mm | 1. Dimensional length | 4205 mm |
4. Wheelbase | 2640 mm | 4. Wheelbase | 2142 mm |