vs.

      John Deere 9430 Powered Scraper vs. New Holland T9040

      9 reasons to buy John Deere 9430 Powered Scraper:

      Operation

      Generator current strength 200 amperes and 175 amperes 12 % more or 25 amperes
      Fuel Capacity 1325 l. and 1135.6 l. 14 % more or 189.4 l.
      Engine oil volume 41.6 l. and 31 l. 25 % more or 10.6 l.
      Turn radius 4450 mm and 5100 mm 13 % less or 650 mm

      Motor

      Displacement 13.5 l. and 12.9 l. 4 % more or 0.6 l.
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump bandwidth 166.6 l/min and 151.4 l/min 9 % more or 15.2 l/min

      Gear box

      Forward gears number 18 and 16 11 % more or 2
      Reverse gears number 6 and 2 67 % more or 4

      3 reasons to buy New Holland T9040:

      Operation

      Cooling system fluid volume 79.9 l. and 53 l. 34 % more or 26.9 l.

      Motor

      Full power 357.2 kW and 316.9 kW 11 % more or 40.3 kW
      Torque increase 40 % and 38 % 5 % more or 2 %

      Neutral reasons:

      Sizes

      Wheelbase 3500 mm and 3911 mm
      Tyre size 710/70 R38 and 20.8R42

      Operation

      Operating voltage 12 V and 12 V
      Three-point attachment type 4/4N and Cat. IV-N

      Motor

      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Manufacturer John Deere and New Holland

      Hydraulic system

      Remote control valves number 4 and 4

      Gear box

      Transmission type 18-powershift and powershift

      Axle

      Last transmission Internal planetary gear unit with two-stage drive axle and Internal 4-planetary gear

      Images

      Sizes

      4. Wheelbase 3500 mm 4. Wheelbase 3911 mm