vs.

      New Holland T9050 vs. AGCO GT75A

      6 reasons to buy New Holland T9050:

      Operation

      Fuel Capacity 1135.6 l. and 89.7 l. 92 % more or 1045.9 l.
      Three-point hitch load-carrying capacity at 24 inches 8900 kg and 1596.6 kg 82 % more or 7303.4 kg

      Motor

      Full power 398.9 kW and 61.9 kW 84 % more or 337.0 kW
      Displacement 12.9 l. and 4 l. 69 % more or 8.9 l.

      Hydraulic system

      Pump bandwidth 151.4 l/min and 86 l/min 43 % more or 65.4 l/min
      Remote control valves number 4 and 2 50 % more or 2

      4 reasons to buy AGCO GT75A:

      Operation

      Turn radius 3810 mm and 5100 mm 25 % less or 1290 mm

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Gear box

      Forward gears number 20 and 16 20 % more or 4
      Reverse gears number 10 and 2 80 % more or 8

      Neutral reasons:

      Sizes

      Dimensional length 7558 mm and 3850 mm
      Height to cab upper part 3818 mm and 2692 mm
      Wheelbase 3911 mm and 2184 mm
      Outer frame width 1116 mm and 1948 mm

      Operation

      Working weight 24494 kg and 2960 kg
      Three-point attachment type Cat. IV-N and Cat. II

      Motor

      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging

      Gear box

      Transmission type powershift and transmission with synchronizer

      Axle

      Last transmission Internal 4-planetary gear and inner planetary

      Images

      Sizes

      1. Dimensional length 7558 mm 1. Dimensional length 3850 mm
      2. Outer frame width 1116 mm 2. Outer frame width 1948 mm
      3. Height to cab upper part 3818 mm 3. Height to cab upper part 2692 mm
      4. Wheelbase 3911 mm 4. Wheelbase 2184 mm