vs.

      New Holland TN75DA vs. John Deere 9230

      2 reasons to buy New Holland TN75DA:

      Operation

      Turn radius 3810 mm and 4450 mm 14 % less or 640 mm

      Motor

      Power measured at 2300 rev / min and 2100 rev / min 9 % more or 200 rev

      8 reasons to buy John Deere 9230:

      Operation

      Three-point hitch load-carrying capacity at 24 inches 6940 kg and 1800 kg 74 % more or 5140 kg
      Generator current strength 200 amperes and 85 amperes 57 % more or 115 amperes
      Fuel Capacity 1325 l. and 74 l. 94 % more or 1251 l.

      Motor

      Full power 242.4 kW and 55.9 kW 77 % more or 186.5 kW
      Cylinders number 6 and 3 50 % more or 3
      Torque increase 38 % and 36 % 5 % more or 2 %
      Displacement 9 l. and 2.9 l. 68 % more or 6.1 l.

      Hydraulic system

      Pump bandwidth 181 l/min and 64 l/min 65 % more or 117 l/min

      Neutral reasons:

      Sizes

      Wheelbase 2065 mm and 3500 mm
      Tyre size Front: 11.2x20, Rear 14.9x28 and 620/70R42

      Operation

      Three-point attachment type Cat. II and 4N/3, 4/4N

      Motor

      Power take mechanism power 46.2 kW and 196.1 kW
      Aspiration turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow

      Hydraulic system

      Overflow valve pressure 18995 kPa and 19994.8 kPa

      Gear box

      Transmission type 8x8 full mesh transmission with synchronized mechanical drive and 24-manual synchronized

      Images

      Sizes

      4. Wheelbase 2065 mm 4. Wheelbase 3500 mm