- Home/
- Comparison/
- Four-Wheel Drive Tractor/
- Tong Yang Moolsan T603 NC PS vs. Steyr 6160 CVT
Tong Yang Moolsan T603 NC PS vs. Steyr 6160 CVT
1 reasons to buy Tong Yang Moolsan T603 NC PS:
Motor
Power measured at | 2600 rev / min and 2100 rev / min | 19 % more or 500 rev |
6 reasons to buy Steyr 6160 CVT:
Operation
Fuel Capacity | 310 l. and 70 l. | 77 % more or 240 l. |
Motor
Cylinders number | 6 and 4 | 33 % more or 2 |
Displacement | 6.6 l. and 2.2 l. | 67 % more or 4.4 l. |
Hydraulic system
Pump bandwidth | 105 l/min and 57.2 l/min | 46 % more or 47.8 l/min |
Remote control valves number | 8 and 3 | 62 % more or 5 |
Gear box
Maximum speed | 40 km/h and 35.5 km/h | 11 % more or 4.5 km/h |
Neutral reasons:
Sizes
Outer frame width | 1817 mm and 2550 mm |
Dimensional length | 3722 mm and 4775 mm |
Height to cab upper part | 2590 mm and 3042 mm |
Wheelbase | 2100 mm and 2806 mm |
Tyre size | Front 12-16.5R4 Rear 16.9-24R4 and Front 540/65 R28, Rear 650/65 R38 |
Motor
Aspiration | turbocharging and Turbocharging with intercooler |
Gear box
Transmission type | transmission with synchronizer and continuous alternating |
Images
Sizes
1. Dimensional length | 3722 mm | 1. Dimensional length | 4775 mm |
2. Outer frame width | 1817 mm | 2. Outer frame width | 2550 mm |
3. Height to cab upper part | 2590 mm | 3. Height to cab upper part | 3042 mm |
4. Wheelbase | 2100 mm | 4. Wheelbase | 2806 mm |