vs.

      John Deere 250C vs. Case 327B

      6 reasons to buy John Deere 250C:

      Sizes

      Clearance 491 mm and 470 mm 4 % more or 21 mm

      Motor

      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev
      Power measured at 2500 rev / min and 2100 rev / min 16 % more or 400 rev

      Gear box

      Maximum speed 48.3 km/h and 46.3 km/h 4 % more or 2.0 km/h

      Dump

      Brimmed volume 11.5 m3 and 10.6 m3 8 % more or 0.9 m3
      Lowering time 7 sec and 13 sec 46 % less or 6 sec

      13 reasons to buy Case 327B:

      Sizes

      Unloading ground clearance 950 mm and 550 mm 42 % more or 400 mm

      Operation

      Fuel Capacity 380 l. and 215.8 l. 43 % more or 164.2 l.
      Hydraulic system fluid volume 220 l. and 79.5 l. 64 % more or 140.5 l.
      Engine oil volume 30.5 l. and 20.1 l. 34 % more or 10.4 l.
      Transmission fluid volume 38 l. and 18 l. 53 % more or 20 l.
      Generator current strength 140 amperes and 55 amperes 61 % more or 85 amperes

      Motor

      Displacement 10.3 l. and 5.9 l. 43 % more or 4.4 l.
      Maximum torque 1450 Nm and 802.6 Nm 45 % more or 647.4 Nm
      Full power 235 kW and 184.2 kW 22 % more or 50.8 kW
      Effective power 224 kW and 176.7 kW 21 % more or 47.3 kW

      Gear box

      Reverse gears number 3 and 1 67 % more or 2

      Dump

      Volume with top 14.5 m3 and 13.8 m3 5 % more or 0.7 m3
      Lifting time 13 sec and 14 sec 7 % less or 1 sec

      Neutral reasons:

      Weight

      Full empty 16488.1 kg and 22570 kg
      Front axle unloaded 8269.9 kg and 12000 kg
      Maximum loading 39487.9 kg and 45769 kg
      Unloaded rear axle 4033.8 kg and 10570 kg

      Sizes

      Overall width 2743.2 mm and 2960 mm
      Headroom 3377.2 mm and 3650 mm
      Unloading height 5791.2 mm and 6230 mm
      Dimensional length 9168.4 mm and 10030 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 23.5R25 and tubeless tires 23.5 R25

      Motor

      Model OM366LA and Family IV 10 l III Level III certified
      Aspiration turbocharging and cooling at the outlet and Turbocharging with subsequent air cooling (by a cooling radiator)
      Cylinders number 6 and 6
      Manufacturer Daimler Chrysler and Case

      Gear box

      Transmission type Allison MD3560P automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock, integral PTO drive and powershift transmission
      Forward gears number 6 and 6

      Dump

      Nominal payload 22999.9 kg and 23200 kg
      Discharge angle 70 degrees and 68 degrees

      Images

      Sizes

      1. Dimensional length 9168.4 mm 1. Dimensional length 10030 mm
      2. Overall width 2743.2 mm 2. Overall width 2960 mm
      3. Headroom 3377.2 mm 3. Headroom 3650 mm
      5. Clearance 491 mm 5. Clearance 470 mm
      6. Unloading height 5791.2 mm 6. Unloading height 6230 mm
      7. Unloading ground clearance 550 mm 7. Unloading ground clearance 950 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 68 degrees