vs.

      John Deere 250C vs. Case 330B

      5 reasons to buy John Deere 250C:

      Sizes

      Clearance 491 mm and 470 mm 4 % more or 21 mm

      Motor

      Power measured at 2500 rev / min and 1800 rev / min 28 % more or 700 rev
      Torque measured at 1600 rev / min and 1140 rev / min 29 % more or 460 rev

      Gear box

      Maximum speed 48.3 km/h and 46.3 km/h 4 % more or 2.0 km/h

      Dump

      Lowering time 7 sec and 13 sec 46 % less or 6 sec

      14 reasons to buy Case 330B:

      Sizes

      Unloading ground clearance 1000 mm and 550 mm 45 % more or 450 mm

      Operation

      Fuel Capacity 380 l. and 215.8 l. 43 % more or 164.2 l.
      Hydraulic system fluid volume 220 l. and 79.5 l. 64 % more or 140.5 l.
      Engine oil volume 30.5 l. and 20.1 l. 34 % more or 10.4 l.
      Transmission fluid volume 38 l. and 18 l. 53 % more or 20 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes

      Motor

      Effective power 249 kW and 176.7 kW 29 % more or 72.3 kW
      Displacement 10.3 l. and 5.9 l. 43 % more or 4.4 l.
      Maximum torque 1650 Nm and 802.6 Nm 51 % more or 847.4 Nm
      Full power 260 kW and 184.2 kW 29 % more or 75.8 kW

      Gear box

      Reverse gears number 3 and 1 67 % more or 2

      Dump

      Brimmed volume 13.7 m3 and 11.5 m3 16 % more or 2.2 m3
      Volume with top 17.6 m3 and 13.8 m3 22 % more or 3.8 m3
      Lifting time 13 sec and 14 sec 7 % less or 1 sec

      Neutral reasons:

      Weight

      Front axle unloaded 8269.9 kg and 12000 kg
      Unloaded rear axle 4033.8 kg and 10570 kg
      Full empty 16488.1 kg and 22570 kg
      Maximum loading 39487.9 kg and 50730 kg

      Sizes

      Dimensional length 9168.4 mm and 10030 mm
      Unloading height 5791.2 mm and 6310 mm
      Overall width 2743.2 mm and 2960 mm
      Headroom 3377.2 mm and 3650 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 23.5R25 and tubeless tires 23.5 R25

      Motor

      Manufacturer Daimler Chrysler and Case
      Model OM366LA and family IV 10 l III Level III certified
      Cylinders number 6 and 6
      Aspiration turbocharging and cooling at the outlet and Turbocharging with subsequent air cooling (by a cooling radiator)

      Gear box

      Transmission type Allison MD3560P automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock, integral PTO drive and powershift transmission
      Forward gears number 6 and 6

      Dump

      Nominal payload 22999.9 kg and 28160 kg
      Discharge angle 70 degrees and 68 degrees

      Images

      Sizes

      7. Unloading ground clearance 550 mm 7. Unloading ground clearance 1000 mm
      1. Dimensional length 9168.4 mm 1. Dimensional length 10030 mm
      2. Overall width 2743.2 mm 2. Overall width 2960 mm
      3. Headroom 3377.2 mm 3. Headroom 3650 mm
      5. Clearance 491 mm 5. Clearance 470 mm
      6. Unloading height 5791.2 mm 6. Unloading height 6310 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 68 degrees