vs.

      John Deere 250D vs. JCB 714

      10 reasons to buy John Deere 250D:

      Operation

      Cooling system fluid volume 32.9 l. and 29.9 l. 9 % more or 3.0 l.
      Engine oil volume 25.5 l. and 16.3 l. 36 % more or 9.2 l.
      Fuel Capacity 340 l. and 199.9 l. 41 % more or 140.1 l.
      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes

      Motor

      Displacement 9 l. and 5.9 l. 34 % more or 3.1 l.
      Maximum torque 1069.7 Nm and 630.5 Nm 41 % more or 439.2 Nm
      Effective power 197.6 kW and 107 kW 46 % more or 90.6 kW

      Gear box

      Maximum speed 50 km/h and 39.9 km/h 20 % more or 10.1 km/h

      Dump

      Volume with top 13.8 m3 and 7.3 m3 47 % more or 6.5 m3
      Lowering time 6 sec and 10 sec 40 % less or 4 sec

      7 reasons to buy JCB 714:

      Sizes

      Unloading ground clearance 680 mm and 580 mm 15 % more or 100 mm

      Operation

      Hydraulic system fluid volume 88 l. and 79 l. 10 % more or 9 l.
      Transmission fluid volume 34.8 l. and 21.8 l. 37 % more or 13.0 l.

      Motor

      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Gear box

      Reverse gears number 3 and 1 67 % more or 2

      Dump

      Lifting time 9.7 sec and 11.9 sec 18 % less or 2.2 sec

      Neutral reasons:

      Weight

      Loaded rear axle 14100 kg and 14170.2 kg
      Full empty 18300 kg and 10140.1 kg
      Front axle unloaded 10140 kg and 6369.8 kg
      Maximum loading 41500 kg and 23140 kg
      Unloaded rear axle 4070 kg and 3769.8 kg
      Loaded front axle 13160 kg and 8969.8 kg

      Sizes

      Clearance 430 mm and 430 mm
      Unloading height 6120 mm and 3862 mm
      Dimensional length 9500 mm and 6784 mm
      Overall width 2820 mm and 2500 mm
      Headroom 3480 mm and 3425 mm
      Wheelbase 5010 mm and 3650 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 23.5R25 and Michelin 20.5 R25

      Motor

      Aspiration Turbocharger with charge air cooler by oncoming air flow and Turbocharging with charge air cooler
      Manufacturer John Deere and Cummins
      Cylinders number 6 and 6
      Model 6090 and 6BTAA

      Gear box

      Transmission type ZF 6 HP592C automatic and plain gear-changing
      Forward gears number 6 and 6

      Dump

      Nominal payload 23200 kg and 13140.1 kg
      Discharge angle 70 degrees and 84 degrees

      Images

      Sizes

      3. Headroom 3480 mm 3. Headroom 3425 mm
      4. Wheelbase 5010 mm 4. Wheelbase 3650 mm
      5. Clearance 430 mm 5. Clearance 430 mm
      6. Unloading height 6120 mm 6. Unloading height 3862 mm
      7. Unloading ground clearance 580 mm 7. Unloading ground clearance 680 mm
      1. Dimensional length 9500 mm 1. Dimensional length 6784 mm
      2. Overall width 2820 mm 2. Overall width 2500 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 84 degrees