vs.

      John Deere 250D vs. Link-Belt D30

      5 reasons to buy John Deere 250D:

      Operation

      Fuel Capacity 340 l. and 325 l. 4 % more or 15 l.
      Transmission fluid volume 21.8 l. and 19 l. 13 % more or 2.8 l.
      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes

      Gear box

      Maximum speed 50 km/h and 48.3 km/h 3 % more or 1.7 km/h

      Dump

      Lowering time 6 sec and 8 sec 25 % less or 2 sec

      13 reasons to buy Link-Belt D30:

      Sizes

      Clearance 484 mm and 430 mm 11 % more or 54 mm
      Unloading ground clearance 975 mm and 580 mm 41 % more or 395 mm

      Operation

      Hydraulic system fluid volume 200 l. and 79 l. 60 % more or 121 l.
      Cooling system fluid volume 43 l. and 32.9 l. 23 % more or 10.1 l.
      Engine oil volume 34 l. and 25.5 l. 25 % more or 8.5 l.

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Displacement 10.8 l. and 9 l. 17 % more or 1.8 l.
      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev
      Maximum torque 1233.8 Nm and 1069.7 Nm 13 % more or 164.1 Nm

      Gear box

      Reverse gears number 3 and 1 67 % more or 2

      Dump

      Brimmed volume 13 m3 and 10.5 m3 19 % more or 2.5 m3
      Volume with top 16.5 m3 and 13.8 m3 16 % more or 2.7 m3
      Lifting time 10 sec and 11.9 sec 16 % less or 1.9 sec

      Neutral reasons:

      Weight

      Maximum loading 41500 kg and 45000 kg
      Front axle unloaded 10140 kg and 8999.7 kg
      Unloaded rear axle 4070 kg and 8999.7 kg
      Full empty 18300 kg and 17999.5 kg

      Sizes

      Dimensional length 9500 mm and 9494 mm
      Overall width 2820 mm and 2860 mm
      Headroom 3480 mm and 3460 mm
      Wheelbase 5010 mm and 5583 mm
      Unloading height 6120 mm and 6000 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 23.5R25 and 23.5 R25

      Motor

      Cylinders number 6 and 6
      Aspiration Turbocharger with charge air cooler by oncoming air flow and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer John Deere and Cummins
      Model 6090 and M11-C270

      Gear box

      Transmission type ZF 6 HP592C automatic and powershift
      Forward gears number 6 and 6

      Dump

      Nominal payload 23200 kg and 27215.5 kg
      Discharge angle 70 degrees and 70 degrees

      Images

      Sizes

      3. Headroom 3480 mm 3. Headroom 3460 mm
      4. Wheelbase 5010 mm 4. Wheelbase 5583 mm
      5. Clearance 430 mm 5. Clearance 484 mm
      6. Unloading height 6120 mm 6. Unloading height 6000 mm
      7. Unloading ground clearance 580 mm 7. Unloading ground clearance 975 mm
      1. Dimensional length 9500 mm 1. Dimensional length 9494 mm
      2. Overall width 2820 mm 2. Overall width 2860 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 70 degrees