vs.

      John Deere 300D vs. Terex TA30-IS

      5 reasons to buy John Deere 300D:

      Sizes

      Clearance 430 mm and 405 mm 6 % more or 25 mm

      Operation

      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Dump

      Lifting time 11.9 sec and 12 sec 1 % less or 0.1 sec
      Lowering time 6 sec and 7.5 sec 20 % less or 1.5 sec

      13 reasons to buy Terex TA30-IS:

      Sizes

      Unloading ground clearance 725 mm and 510 mm 30 % more or 215 mm

      Operation

      Fuel Capacity 390 l. and 340 l. 13 % more or 50 l.
      Hydraulic system fluid volume 202 l. and 79 l. 61 % more or 123 l.
      Cooling system fluid volume 54 l. and 32.9 l. 39 % more or 21.1 l.
      Engine oil volume 34 l. and 25.5 l. 25 % more or 8.5 l.
      Transmission fluid volume 63 l. and 21.8 l. 65 % more or 41.2 l.

      Motor

      Maximum torque 1776.1 Nm and 1069.7 Nm 40 % more or 706.4 Nm
      Effective power 248.3 kW and 212.5 kW 14 % more or 35.8 kW
      Displacement 10.8 l. and 9 l. 17 % more or 1.8 l.

      Gear box

      Reverse gears number 3 and 1 67 % more or 2
      Maximum speed 51 km/h and 50 km/h 2 % more or 1 km/h

      Dump

      Brimmed volume 13.8 m3 and 12.6 m3 9 % more or 1.2 m3
      Volume with top 17.5 m3 and 16.6 m3 5 % more or 0.9 m3

      Neutral reasons:

      Weight

      Unloaded central axis 4550 kg and 5300.2 kg
      Unloaded rear axle 4540 kg and 5400 kg
      Loaded front axle 14050 kg and 16801.1 kg
      Loaded central axis 16450 kg and 16719.4 kg
      Front axle unloaded 10410 kg and 11720.8 kg
      Loaded rear axle 16300 kg and 16946.2 kg
      Full empty 19500 kg and 22421.1 kg
      Maximum loading 46800 kg and 50421.3 kg

      Sizes

      Wheelbase 5010 mm and 5100 mm
      Dimensional length 9580 mm and 9755 mm
      Unloading height 6200 mm and 6110 mm
      Overall width 2950 mm and 2895 mm
      Headroom 3480 mm and 3450 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 23.5R25 and 23.5R25

      Motor

      Aspiration Turbocharger with charge air cooler by oncoming air flow and turbocharging
      Cylinders number 6 and 6
      Torque measured at 1400 rev / min and 1400 rev / min
      Manufacturer John Deere and Cummins
      Model 6090 and QSM11

      Gear box

      Transmission type ZF 6 HP592C automatic and ZF 6WG 310 RPC
      Forward gears number 6 and 6

      Dump

      Nominal payload 27300 kg and 28000.3 kg
      Discharge angle 70 degrees and 65 degrees

      Images

      Sizes

      1. Dimensional length 9580 mm 1. Dimensional length 9755 mm
      2. Overall width 2950 mm 2. Overall width 2895 mm
      3. Headroom 3480 mm 3. Headroom 3450 mm
      4. Wheelbase 5010 mm 4. Wheelbase 5100 mm
      5. Clearance 430 mm 5. Clearance 405 mm
      6. Unloading height 6200 mm 6. Unloading height 6110 mm
      7. Unloading ground clearance 510 mm 7. Unloading ground clearance 725 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 65 degrees