vs.

      John Deere 350C vs. Case 327B

      11 reasons to buy John Deere 350C:

      Sizes

      Clearance 569 mm and 470 mm 17 % more or 99 mm

      Operation

      Fuel Capacity 400 l. and 380 l. 5 % more or 20 l.
      Engine oil volume 34 l. and 30.5 l. 10 % more or 3.5 l.

      Motor

      Full power 257.3 kW and 235 kW 9 % more or 22.3 kW
      Effective power 249.8 kW and 224 kW 10 % more or 25.8 kW
      Displacement 14.6 l. and 10.3 l. 29 % more or 4.3 l.
      Maximum torque 1605.3 Nm and 1450 Nm 10 % more or 155.3 Nm

      Gear box

      Maximum speed 50 km/h and 46.3 km/h 7 % more or 3.7 km/h

      Dump

      Lowering time 10 sec and 13 sec 23 % less or 3 sec
      Brimmed volume 15 m3 and 10.6 m3 29 % more or 4.4 m3
      Volume with top 19.6 m3 and 14.5 m3 26 % more or 5.1 m3

      8 reasons to buy Case 327B:

      Sizes

      Unloading ground clearance 950 mm and 765 mm 19 % more or 185 mm

      Operation

      Hydraulic system fluid volume 220 l. and 140 l. 36 % more or 80 l.
      Transmission fluid volume 38 l. and 28 l. 26 % more or 10 l.
      Generator current strength 140 amperes and 55 amperes 61 % more or 85 amperes

      Motor

      Torque measured at 1400 rev / min and 1000 rev / min 29 % more or 400 rev

      Gear box

      Forward gears number 6 and 5 17 % more or 1
      Reverse gears number 3 and 1 67 % more or 2

      Dump

      Lifting time 13 sec and 19 sec 32 % less or 6 sec

      Neutral reasons:

      Weight

      Front axle unloaded 13530 kg and 12000 kg
      Unloaded rear axle 6530 kg and 10570 kg
      Full empty 26890 kg and 22570 kg
      Maximum loading 58890 kg and 45769 kg

      Sizes

      Headroom 3631 mm and 3650 mm
      Wheelbase 4474 mm and 5910 mm
      Dimensional length 10545 mm and 10030 mm
      Overall width 3200 mm and 2960 mm
      Unloading height 6950 mm and 6230 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 26.5R25 and tubeless tires 23.5 R25

      Motor

      Model OM442A and Family IV 10 l III Level III certified
      Power measured at 2100 rev / min and 2100 rev / min
      Manufacturer Daimler Chrysler and Case
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)

      Gear box

      Transmission type Allison HD4560 installed on the engine automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock and powershift transmission

      Dump

      Nominal payload 32000 kg and 23200 kg
      Discharge angle 70 degrees and 68 degrees

      Images

      Sizes

      3. Headroom 3631 mm 3. Headroom 3650 mm
      4. Wheelbase 4474 mm 4. Wheelbase 5910 mm
      5. Clearance 569 mm 5. Clearance 470 mm
      6. Unloading height 6950 mm 6. Unloading height 6230 mm
      7. Unloading ground clearance 765 mm 7. Unloading ground clearance 950 mm
      1. Dimensional length 10545 mm 1. Dimensional length 10030 mm
      2. Overall width 3200 mm 2. Overall width 2960 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 68 degrees