vs.

      John Deere 350C vs. Case 330B

      10 reasons to buy John Deere 350C:

      Sizes

      Clearance 569 mm and 470 mm 17 % more or 99 mm

      Operation

      Fuel Capacity 400 l. and 380 l. 5 % more or 20 l.
      Engine oil volume 34 l. and 30.5 l. 10 % more or 3.5 l.

      Motor

      Displacement 14.6 l. and 10.3 l. 29 % more or 4.3 l.
      Effective power 249.8 kW and 249 kW 0 % more or 0.8 kW
      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev

      Gear box

      Maximum speed 50 km/h and 46.3 km/h 7 % more or 3.7 km/h

      Dump

      Brimmed volume 15 m3 and 13.7 m3 9 % more or 1.3 m3
      Volume with top 19.6 m3 and 17.6 m3 10 % more or 2.0 m3
      Lowering time 10 sec and 13 sec 23 % less or 3 sec

      10 reasons to buy Case 330B:

      Sizes

      Unloading ground clearance 1000 mm and 765 mm 23 % more or 235 mm

      Operation

      Hydraulic system fluid volume 220 l. and 140 l. 36 % more or 80 l.
      Transmission fluid volume 38 l. and 28 l. 26 % more or 10 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes

      Motor

      Maximum torque 1650 Nm and 1605.3 Nm 3 % more or 44.7 Nm
      Torque measured at 1140 rev / min and 1000 rev / min 12 % more or 140 rev
      Full power 260 kW and 257.3 kW 1 % more or 2.7 kW

      Gear box

      Forward gears number 6 and 5 17 % more or 1
      Reverse gears number 3 and 1 67 % more or 2

      Dump

      Lifting time 13 sec and 19 sec 32 % less or 6 sec

      Neutral reasons:

      Weight

      Front axle unloaded 13530 kg and 12000 kg
      Unloaded rear axle 6530 kg and 10570 kg
      Full empty 26890 kg and 22570 kg
      Maximum loading 58890 kg and 50730 kg

      Sizes

      Unloading height 6950 mm and 6310 mm
      Dimensional length 10545 mm and 10030 mm
      Overall width 3200 mm and 2960 mm
      Headroom 3631 mm and 3650 mm
      Wheelbase 4474 mm and 5910 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 26.5R25 and tubeless tires 23.5 R25

      Motor

      Manufacturer Daimler Chrysler and Case
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Model OM442A and family IV 10 l III Level III certified

      Gear box

      Transmission type Allison HD4560 installed on the engine automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock and powershift transmission

      Dump

      Nominal payload 32000 kg and 28160 kg
      Discharge angle 70 degrees and 68 degrees

      Images

      Sizes

      3. Headroom 3631 mm 3. Headroom 3650 mm
      4. Wheelbase 4474 mm 4. Wheelbase 5910 mm
      5. Clearance 569 mm 5. Clearance 470 mm
      6. Unloading height 6950 mm 6. Unloading height 6310 mm
      7. Unloading ground clearance 765 mm 7. Unloading ground clearance 1000 mm
      1. Dimensional length 10545 mm 1. Dimensional length 10030 mm
      2. Overall width 3200 mm 2. Overall width 2960 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 68 degrees