vs.

      John Deere 350C vs. Link-Belt D300

      12 reasons to buy John Deere 350C:

      Sizes

      Clearance 569 mm and 526 mm 8 % more or 43 mm

      Operation

      Fuel Capacity 400 l. and 325 l. 19 % more or 75 l.
      Cooling system fluid volume 34 l. and 13 l. 62 % more or 21 l.
      Engine oil volume 34 l. and 33 l. 3 % more or 1 l.

      Motor

      Full power 257.3 kW and 223.7 kW 13 % more or 33.6 kW
      Effective power 249.8 kW and 213.3 kW 15 % more or 36.5 kW
      Displacement 14.6 l. and 10.8 l. 26 % more or 3.8 l.
      Maximum torque 1605.3 Nm and 1376.2 Nm 14 % more or 229.1 Nm

      Gear box

      Maximum speed 50 km/h and 44.6 km/h 11 % more or 5.4 km/h

      Dump

      Lowering time 10 sec and 16 sec 37 % less or 6 sec
      Brimmed volume 15 m3 and 13 m3 13 % more or 2 m3
      Volume with top 19.6 m3 and 16 m3 18 % more or 3.6 m3

      8 reasons to buy Link-Belt D300:

      Sizes

      Unloading ground clearance 830 mm and 765 mm 8 % more or 65 mm

      Operation

      Transmission fluid volume 38 l. and 28 l. 26 % more or 10 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Hydraulic system fluid volume 300 l. and 140 l. 53 % more or 160 l.

      Motor

      Torque measured at 1300 rev / min and 1000 rev / min 23 % more or 300 rev

      Gear box

      Forward gears number 6 and 5 17 % more or 1
      Reverse gears number 3 and 1 67 % more or 2

      Dump

      Lifting time 14 sec and 19 sec 26 % less or 5 sec

      Neutral reasons:

      Weight

      Front axle unloaded 13530 kg and 9789.9 kg
      Unloaded rear axle 6530 kg and 9800.3 kg
      Full empty 26890 kg and 19590.2 kg
      Maximum loading 58890 kg and 46589.8 kg

      Sizes

      Dimensional length 10545 mm and 9608 mm
      Overall width 3200 mm and 2795 mm
      Headroom 3631 mm and 3517 mm
      Wheelbase 4474 mm and 5183 mm
      Unloading height 6950 mm and 6394 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 26.5R25 and 23.5 R25

      Motor

      Model OM442A and MTA 11-C
      Manufacturer Daimler Chrysler and Cummins
      Power measured at 2100 rev / min and 2100 rev / min
      Aspiration turbocharging and turbocharging

      Gear box

      Transmission type Allison HD4560 installed on the engine automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock and powershift

      Dump

      Nominal payload 32000 kg and 27000.1 kg
      Discharge angle 70 degrees and 67 degrees

      Images

      Sizes

      1. Dimensional length 10545 mm 1. Dimensional length 9608 mm
      2. Overall width 3200 mm 2. Overall width 2795 mm
      3. Headroom 3631 mm 3. Headroom 3517 mm
      4. Wheelbase 4474 mm 4. Wheelbase 5183 mm
      5. Clearance 569 mm 5. Clearance 526 mm
      6. Unloading height 6950 mm 6. Unloading height 6394 mm
      7. Unloading ground clearance 765 mm 7. Unloading ground clearance 830 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 67 degrees