- Home/
- Comparison/
- Articulated Hauler/
- John Deere 400C vs. Terex TA40
John Deere 400C vs. Terex TA40
3 reasons to buy John Deere 400C:
Operation
Engine oil volume | 34 l. and 32 l. | 6 % more or 2 l. |
Motor
Displacement | 14.6 l. and 14 l. | 4 % more or 0.6 l. |
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
17 reasons to buy Terex TA40:
Sizes
Clearance | 900 mm and 619 mm | 31 % more or 281 mm |
Unloading ground clearance | 900 mm and 815 mm | 9 % more or 85 mm |
Operation
Fuel Capacity | 450 l. and 400 l. | 11 % more or 50 l. |
Hydraulic system fluid volume | 330 l. and 140 l. | 58 % more or 190 l. |
Cooling system fluid volume | 67 l. and 64 l. | 4 % more or 3 l. |
Transmission fluid volume | 61 l. and 28 l. | 54 % more or 33 l. |
Generator current strength | 100 amperes and 55 amperes | 45 % more or 45 amperes |
Motor
Effective power | 325.9 kW and 305.7 kW | 6 % more or 20.2 kW |
Torque measured at | 1350 rev / min and 1200 rev / min | 11 % more or 150 rev |
Maximum torque | 2098.8 Nm and 1749 Nm | 17 % more or 349.8 Nm |
Full power | 335.6 kW and 319.9 kW | 5 % more or 15.7 kW |
Gear box
Forward gears number | 6 and 5 | 17 % more or 1 |
Maximum speed | 60 km/h and 49 km/h | 18 % more or 11 km/h |
Dump
Lowering time | 8 sec and 10 sec | 20 % less or 2 sec |
Brimmed volume | 17.4 m3 and 17 m3 | 2 % more or 0.4 m3 |
Volume with top | 23.3 m3 and 22 m3 | 6 % more or 1.3 m3 |
Lifting time | 12.5 sec and 19 sec | 34 % less or 6.5 sec |
Neutral reasons:
Weight
Front axle unloaded | 14190 kg and 15846.7 kg |
Unloaded central axis | 7280 kg and 7484.3 kg |
Unloaded rear axle | 6980 kg and 7424.4 kg |
Loaded front axle | 20730 kg and 18281.6 kg |
Loaded central axis | 22210 kg and 24947.6 kg |
Loaded rear axle | 22010 kg and 24947.6 kg |
Full empty | 28450 kg and 30755.4 kg |
Maximum loading | 64950 kg and 68755.1 kg |
Sizes
Headroom | 3681 mm and 3900 mm |
Wheelbase | 4474 mm and 5300 mm |
Dimensional length | 10671 mm and 10900 mm |
Overall width | 3380 mm and 3400 mm |
Unloading height | 7193 mm and 6900 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 29.5R25 and 29.5R25 |
Motor
Aspiration | turbocharging and cooling at the outlet and turbocharging |
Manufacturer | Daimler Chrysler and Detroit diesel |
Model | OM442LA and lot 60 |
Gear box
Reverse gears number | 1 and 1 |
Transmission type | Allison HD4560 installed on the engine automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock and Allison 4500 ORS fully automatic transmission with a planetary gearshift mechanism |
Dump
Nominal payload | 36500 kg and 37999.7 kg |
Discharge angle | 70 degrees and 66 degrees |
Images
Sizes
5. Clearance | 619 mm | 5. Clearance | 900 mm |
6. Unloading height | 7193 mm | 6. Unloading height | 6900 mm |
7. Unloading ground clearance | 815 mm | 7. Unloading ground clearance | 900 mm |
1. Dimensional length | 10671 mm | 1. Dimensional length | 10900 mm |
2. Overall width | 3380 mm | 2. Overall width | 3400 mm |
3. Headroom | 3681 mm | 3. Headroom | 3900 mm |
4. Wheelbase | 4474 mm | 4. Wheelbase | 5300 mm |
Dump
8. Discharge angle | 70 degrees | 8. Discharge angle | 66 degrees |