vs.

      John Deere 400D vs. Link-Belt D30

      10 reasons to buy John Deere 400D:

      Sizes

      Clearance 560 mm and 484 mm 14 % more or 76 mm

      Operation

      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes
      Fuel Capacity 485 l. and 325 l. 33 % more or 160 l.
      Transmission fluid volume 34 l. and 19 l. 44 % more or 15 l.

      Motor

      Maximum torque 1974 Nm and 1233.8 Nm 37 % more or 740.2 Nm
      Displacement 12 l. and 10.8 l. 10 % more or 1.2 l.

      Gear box

      Maximum speed 52 km/h and 48.3 km/h 7 % more or 3.7 km/h

      Dump

      Brimmed volume 16.9 m3 and 13 m3 23 % more or 3.9 m3
      Volume with top 22.4 m3 and 16.5 m3 26 % more or 5.9 m3
      Lowering time 7.6 sec and 8 sec 5 % less or 0.4 sec

      8 reasons to buy Link-Belt D30:

      Sizes

      Unloading ground clearance 975 mm and 650 mm 33 % more or 325 mm

      Operation

      Hydraulic system fluid volume 200 l. and 178 l. 11 % more or 22 l.
      Cooling system fluid volume 43 l. and 33.6 l. 22 % more or 9.4 l.
      Engine oil volume 34 l. and 30 l. 12 % more or 4 l.

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev
      Torque measured at 1500 rev / min and 1080 rev / min 28 % more or 420 rev

      Gear box

      Reverse gears number 3 and 1 67 % more or 2

      Dump

      Lifting time 10 sec and 13 sec 23 % less or 3 sec

      Neutral reasons:

      Weight

      Unloaded rear axle 7000 kg and 8999.7 kg
      Full empty 29920 kg and 17999.5 kg
      Maximum loading 66920 kg and 45000 kg
      Front axle unloaded 14930 kg and 8999.7 kg

      Sizes

      Dimensional length 10540 mm and 9494 mm
      Overall width 3810 mm and 2860 mm
      Headroom 3890 mm and 3460 mm
      Wheelbase 5450 mm and 5583 mm
      Unloading height 7240 mm and 6000 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 29.5R25 and 23.5 R25

      Motor

      Aspiration turbocharging / air cooling and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Mercedes-Benz and Cummins
      Cylinders number 6 and 6
      Model OM501LA and M11-C270

      Gear box

      Transmission type Allison 4500R ORS fully automatic engine and powershift
      Forward gears number 6 and 6

      Dump

      Discharge angle 70 degrees and 70 degrees
      Nominal payload 37000 kg and 27215.5 kg

      Images

      Sizes

      1. Dimensional length 10540 mm 1. Dimensional length 9494 mm
      2. Overall width 3810 mm 2. Overall width 2860 mm
      3. Headroom 3890 mm 3. Headroom 3460 mm
      4. Wheelbase 5450 mm 4. Wheelbase 5583 mm
      5. Clearance 560 mm 5. Clearance 484 mm
      6. Unloading height 7240 mm 6. Unloading height 6000 mm
      7. Unloading ground clearance 650 mm 7. Unloading ground clearance 975 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 70 degrees