vs.

      Link-Belt D30 vs. JCB 714

      12 reasons to buy Link-Belt D30:

      Sizes

      Unloading ground clearance 975 mm and 680 mm 30 % more or 295 mm
      Clearance 484 mm and 430 mm 11 % more or 54 mm

      Operation

      Cooling system fluid volume 43 l. and 29.9 l. 30 % more or 13.1 l.
      Engine oil volume 34 l. and 16.3 l. 52 % more or 17.7 l.
      Fuel Capacity 325 l. and 199.9 l. 38 % more or 125.1 l.
      Hydraulic system fluid volume 200 l. and 88 l. 56 % more or 112 l.

      Motor

      Maximum torque 1233.8 Nm and 630.5 Nm 49 % more or 603.3 Nm
      Full power 201.3 kW and 111.9 kW 44 % more or 89.4 kW
      Displacement 10.8 l. and 5.9 l. 45 % more or 4.9 l.

      Gear box

      Maximum speed 48.3 km/h and 39.9 km/h 17 % more or 8.4 km/h

      Dump

      Volume with top 16.5 m3 and 7.3 m3 56 % more or 9.2 m3
      Lowering time 8 sec and 10 sec 20 % less or 2 sec

      3 reasons to buy JCB 714:

      Operation

      Transmission fluid volume 34.8 l. and 19 l. 45 % more or 15.8 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Dump

      Lifting time 9.7 sec and 10 sec 3 % less or 0.3 sec

      Neutral reasons:

      Weight

      Front axle unloaded 8999.7 kg and 6369.8 kg
      Unloaded rear axle 8999.7 kg and 3769.8 kg
      Full empty 17999.5 kg and 10140.1 kg
      Maximum loading 45000 kg and 23140 kg

      Sizes

      Unloading height 6000 mm and 3862 mm
      Dimensional length 9494 mm and 6784 mm
      Overall width 2860 mm and 2500 mm
      Headroom 3460 mm and 3425 mm
      Wheelbase 5583 mm and 3650 mm

      Operation

      Operating voltage 24 V and 24 V
      Generator current strength 70 amperes and 70 amperes
      Tyre size 23.5 R25 and Michelin 20.5 R25

      Motor

      Torque measured at 1500 rev / min and 1500 rev / min
      Manufacturer Cummins and Cummins
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with charge air cooler
      Model M11-C270 and 6BTAA
      Cylinders number 6 and 6

      Gear box

      Transmission type powershift and plain gear-changing
      Forward gears number 6 and 6
      Reverse gears number 3 and 3

      Dump

      Discharge angle 70 degrees and 84 degrees
      Nominal payload 27215.5 kg and 13140.1 kg

      Images

      Sizes

      5. Clearance 484 mm 5. Clearance 430 mm
      6. Unloading height 6000 mm 6. Unloading height 3862 mm
      7. Unloading ground clearance 975 mm 7. Unloading ground clearance 680 mm
      1. Dimensional length 9494 mm 1. Dimensional length 6784 mm
      2. Overall width 2860 mm 2. Overall width 2500 mm
      3. Headroom 3460 mm 3. Headroom 3425 mm
      4. Wheelbase 5583 mm 4. Wheelbase 3650 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 84 degrees