- Home/
- Comparison/
- Crawler-Mounted Loader/
- Caterpillar 933C LGP vs. Caterpillar 931C serie II
Caterpillar 933C LGP vs. Caterpillar 931C serie II
18 reasons to buy Caterpillar 933C LGP:
Sizes
| Ground clearance at full height and unloading | 2728 mm and 2619 mm | 4 % more or 109 mm |
| Width to outside of caterpillar track | 2311 mm and 1780 mm | 23 % more or 531 mm |
| Clearance | 406 mm and 308 mm | 24 % more or 98 mm |
Operation
| Cooling system fluid volume | 21 l. and 20 l. | 5 % more or 1 l. |
| Engine oil volume | 13 l. and 12 l. | 8 % more or 1 l. |
| Fuel Capacity | 157 l. and 116 l. | 26 % more or 41 l. |
| Each final drive fluid volume | 20.5 l. and 8 l. | 61 % more or 12.5 l. |
| Generator current strength | 55 amperes and 40 amperes | 27 % more or 15 amperes |
Motor
| Cylinders number | 6 and 4 | 33 % more or 2 |
| Effective power | 52.2 kW and 52 kW | 0 % more or 0.2 kW |
Hydraulic system
| Pump bandwidth | 103 l/min and 85.9 l/min | 17 % more or 17.1 l/min |
| Lifting time | 5.8 sec and 6 sec | 3 % less or 0.2 sec |
| Unloading time | 1.7 sec and 2.7 sec | 37 % less or 1.0 sec |
| Lowering time | 2 sec and 3.1 sec | 35 % less or 1.1 sec |
Carrier
| Rolling bearings number on either side | 6 and 5 | 17 % more or 1 |
| Specific ground pressure | 32.8 kPa and 58.6 kPa | 44 % less or 25.8 kPa |
| Contact with ground area | 2.6 m2 and 1.4 m2 | 46 % more or 1.2 m2 |
| Track shoes number per side | 39 and 37 | 5 % more or 2 |
5 reasons to buy Caterpillar 931C serie II:
Operation
| Hydraulic system fluid volume | 57 l. and 56.8 l. | 0 % more or 0.2 l. |
| Static tipping load | 4895 kg and 5630 kg | 13 % less or 735 kg |
| Breakout force in folded state | 63.5 kN and 83.6 kN | 24 % less or 20.1 kN |
| Maximum speed | 11.2 km/h and 9 km/h | 20 % more or 2.2 km/h |
Motor
| Displacement | 5.2 l. and 5 l. | 4 % more or 0.2 l. |
Neutral reasons:
Sizes
| Radius at high altitude unloading | 803 mm and 828 mm |
| Length to front of caterpillar track | 2955 mm and 2814 mm |
| Length with bucket on ground level | 4301 mm and 4142 mm |
| Height to cab upper part | 2748 mm and 2678 mm |
Operation
| Working weight | 8485 kg and 8047 kg |
| Operating voltage | 12 V and 12 V |
Motor
| Model | 3046 and 3204 |
| Power measured at | 2400 rev / min and 2400 rev / min |
Hydraulic system
| Type of pump | with open center, parallel system and Gear type pump with single section |
| Overflow valve pressure | 19820 kPa and 17236.9 kPa |
Carrier
| Caterpillar track length on ground level | 2050 mm and 1900 mm |
| Track width | 1680 mm and 1422 mm |
| Track shoe width | 635 mm and 355.6 mm |
Images
Sizes
| 5. Clearance | 406 mm | 5. Clearance | 308 mm |
| 7. Ground clearance at full height and unloading | 2728 mm | 7. Ground clearance at full height and unloading | 2619 mm |
| 8. Radius at high altitude unloading | 803 mm | 8. Radius at high altitude unloading | 828 mm |
| 1. Length with bucket on ground level | 4301 mm | 1. Length with bucket on ground level | 4142 mm |
| 2. Width to outside of caterpillar track | 2311 mm | 2. Width to outside of caterpillar track | 1780 mm |
| 3. Height to cab upper part | 2748 mm | 3. Height to cab upper part | 2678 mm |
Carrier
| 9. Track width | 1680 mm | 9. Track width | 1422 mm |