- Home/
- Comparison/
- Crawler-Mounted Loader/
- John Deere 655B vs. Caterpillar 933C
John Deere 655B vs. Caterpillar 933C
15 reasons to buy John Deere 655B:
Sizes
Width to outside of caterpillar track | 2151 mm and 1803 mm | 16 % more or 348 mm |
Ground clearance at full height and unloading | 2807 mm and 2560 mm | 9 % more or 247 mm |
Operation
Fuel Capacity | 276.3 l. and 157 l. | 43 % more or 119.3 l. |
Cooling system fluid volume | 26.5 l. and 21 l. | 21 % more or 5.5 l. |
Engine oil volume | 18.9 l. and 13 l. | 31 % more or 5.9 l. |
Hydraulic system fluid volume | 140 l. and 56.8 l. | 59 % more or 83.2 l. |
Brimmed bucket capacity | 1.3 m3 and 1 m3 | 23 % more or 0.3 m3 |
Maximum speed | 10.5 km/h and 9 km/h | 14 % more or 1.5 km/h |
Motor
Effective power | 89.5 kW and 52.2 kW | 42 % more or 37.3 kW |
Displacement | 6.8 l. and 5 l. | 26 % more or 1.8 l. |
Hydraulic system
Pump bandwidth | 204 l/min and 103 l/min | 50 % more or 101 l/min |
Lifting time | 5.9 sec and 8.8 sec | 33 % less or 2.9 sec |
Unloading time | 1.3 sec and 1.7 sec | 24 % less or 0.4 sec |
Carrier
Contact with ground area | 1.8 m2 and 1.5 m2 | 17 % more or 0.3 m2 |
Track shoes number per side | 40 and 39 | 2 % more or 1 |
9 reasons to buy Caterpillar 933C:
Sizes
Clearance | 393 mm and 356 mm | 9 % more or 37 mm |
Operation
Each final drive fluid volume | 13.8 l. and 13.2 l. | 4 % more or 0.6 l. |
Static tipping load | 5821 kg and 8660 kg | 33 % less or 2839 kg |
Breakout force in folded state | 77.4 kN and 110 kN | 30 % less or 32.6 kN |
Generator current strength | 90 amperes and 40 amperes | 56 % more or 50 amperes |
Motor
Power measured at | 2400 rev / min and 2100 rev / min | 12 % more or 300 rev |
Hydraulic system
Lowering time | 2 sec and 3.2 sec | 37 % less or 1.2 sec |
Carrier
Specific ground pressure | 54 kPa and 82 kPa | 34 % less or 28 kPa |
Rolling bearings number on either side | 6 and 1 | 83 % more or 5 |
Neutral reasons:
Sizes
Length to front of caterpillar track | 5652 mm and 2955 mm |
Length with bucket on ground level | 5652 mm and 4352 mm |
Height to cab upper part | 3086 mm and 2730 mm |
Radius at high altitude unloading | 1219 mm and 859 mm |
Operation
Operating voltage | 24 V and 12 V |
Working weight | 14695 kg and 8485 kg |
Motor
Manufacturer | John Deere and Caterpillar |
Model | 6068T and 3046 |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | gear type pump and with open center, parallel system |
Overflow valve pressure | 15514 kPa and 19820 kPa |
Carrier
Track width | 1625 mm and 1450 mm |
Track shoe width | 381 mm and 356 mm |
Caterpillar track length on ground level | 2306 mm and 2050 mm |
Images
Sizes
1. Length with bucket on ground level | 5652 mm | 1. Length with bucket on ground level | 4352 mm |
2. Width to outside of caterpillar track | 2151 mm | 2. Width to outside of caterpillar track | 1803 mm |
3. Height to cab upper part | 3086 mm | 3. Height to cab upper part | 2730 mm |
5. Clearance | 356 mm | 5. Clearance | 393 mm |
7. Ground clearance at full height and unloading | 2807 mm | 7. Ground clearance at full height and unloading | 2560 mm |
8. Radius at high altitude unloading | 1219 mm | 8. Radius at high altitude unloading | 859 mm |
Carrier
9. Track width | 1625 mm | 9. Track width | 1450 mm |