- Home/
- Comparison/
- Crawler-Mounted Loader/
- John Deere 755B vs. John Deere 755C serie II
John Deere 755B vs. John Deere 755C serie II
6 reasons to buy John Deere 755B:
Operation
Static tipping load | 11494 kg and 13795 kg | 17 % less or 2301 kg |
Breakout force in folded state | 122 kN and 164.9 kN | 26 % less or 42.9 kN |
Motor
Torque measured at | 1300 rev / min and 1000 rev / min | 23 % more or 300 rev |
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Hydraulic system
Lifting time | 5.9 sec and 6.5 sec | 9 % less or 0.6 sec |
Unloading time | 1.3 sec and 2.1 sec | 38 % less or 0.8 sec |
18 reasons to buy John Deere 755C serie II:
Sizes
Clearance | 426 mm and 389 mm | 9 % more or 37 mm |
Ground clearance at full height and unloading | 3085 mm and 2845 mm | 8 % more or 240 mm |
Operation
Generator current strength | 55 amperes and 40 amperes | 27 % more or 15 amperes |
Maximum speed | 10.9 km/h and 10.8 km/h | 1 % more or 0.1 km/h |
Fuel Capacity | 319.9 l. and 276.3 l. | 14 % more or 43.6 l. |
Cooling system fluid volume | 57.9 l. and 26.5 l. | 54 % more or 31.4 l. |
Engine oil volume | 22 l. and 18.9 l. | 14 % more or 3.1 l. |
Each final drive fluid volume | 68.1 l. and 13.2 l. | 81 % more or 54.9 l. |
Hydraulic system fluid volume | 174.9 l. and 140 l. | 20 % more or 34.9 l. |
Motor
Maximum torque | 919.2 Nm and 569.4 Nm | 38 % more or 349.8 Nm |
Effective power | 132 kW and 104.4 kW | 21 % more or 27.6 kW |
Displacement | 10 l. and 6.8 l. | 32 % more or 3.2 l. |
Hydraulic system
Lowering time | 1.5 sec and 3.2 sec | 53 % less or 1.7 sec |
Pump bandwidth | 208.2 l/min and 204 l/min | 2 % more or 4.2 l/min |
Carrier
Track shoes number per side | 39 and 36 | 8 % more or 3 |
Rolling bearings number on either side | 6 and 1 | 83 % more or 5 |
Contact with ground area | 2.7 m2 and 2 m2 | 26 % more or 0.7 m2 |
Specific ground pressure | 75.8 kPa and 78.6 kPa | 4 % less or 2.8 kPa |
Neutral reasons:
Sizes
Height to cab upper part | 3142 mm and 3304 mm |
Length to front of caterpillar track | 5639 mm and 4801 mm |
Length with bucket on ground level | 5639 mm and 6832 mm |
Radius at high altitude unloading | 1194 mm and 1192 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 16400 kg and 21001.3 kg |
Motor
Model | 6068T and D 926 T-EA2 |
Aspiration | turbocharging and turbocharging |
Cylinders number | 6 and 6 |
Manufacturer | John Deere and Liebherr |
Hydraulic system
Type of pump | gear type pump and Variable displacement piston pump with load sensing proportional pump flow control |
Overflow valve pressure | 17237 kPa and 25993.2 kPa |
Carrier
Track shoe width | 432 mm and 508 mm |
Caterpillar track length on ground level | 2375 mm and 2673 mm |
Track width | 1676 mm and 1800 mm |
Images
Sizes
5. Clearance | 389 mm | 5. Clearance | 426 mm |
7. Ground clearance at full height and unloading | 2845 mm | 7. Ground clearance at full height and unloading | 3085 mm |
8. Radius at high altitude unloading | 1194 mm | 8. Radius at high altitude unloading | 1192 mm |
1. Length with bucket on ground level | 5639 mm | 1. Length with bucket on ground level | 6832 mm |
3. Height to cab upper part | 3142 mm | 3. Height to cab upper part | 3304 mm |
Carrier
9. Track width | 1676 mm | 9. Track width | 1800 mm |